ALKY 2 stoke feedback

Hoosier Daddy · December 23, 2004, 08:21:58 PM

hey guys im experimenting with methonal in my banshee.
when i mixed my oil with it (yamalube) and pored in into my tank it turned in to a "gel" and plugged up my tank filter..
the bike obviously ran like crap even before it gelled up.

so whats up? what do i have to do to run ALKY and get the power this stuff has??

big-daddy · December 23, 2004, 09:09:35 PM

Chris, we use model truck fuel call BACKYARD BASHER. its a mix of methanol, nitomethane and non petroleum lubricant. 20% nitro 16% oil we mix it with little bit of bean castor oil for more lubricant. I can get the correct mix formula for you. they also make 30% nitro mix more of 100yard runs. but before you can run this fuel you need to rejet the carb to handle the fuel mix. I use a dyno and a temp gun to rejet my carb. to you have access to a dyno? the temp gun is used to check the temp of the exhuast and the sparkplugs to make sure both carbs are tuned the same (leaner hotter, richer colder) do not go by the position of the air screws to adjust mix.

Hoosier Daddy · December 23, 2004, 10:10:24 PM

well you made think of something, can you NOT mix ALKY with a 50/50 blend 2 stroke oil? does it have to be 100% synthetic?

Zilla_Kid · December 23, 2004, 10:23:35 PM

Hey ware i race up there with you guys at saltsdale, and i am pretty good friends with ronnie, and i have a alcohol setup for my zilla, and the only oil i use is klotz benol, and i have had no problems mixing it. if you have anymore questions pm me, i have a pretty good amount of experience with the alcohol

big-daddy · December 23, 2004, 11:29:59 PM

from the VP race fuel web site: (E) ANGUS NITROFUEL AND NITROFUEL 90 RACING NITROMETHANE
Highest Purity and consistency. Used by top teams in drag racing around the world. Mixes with methanol for drag, oval track and hobby applications. Nitro fuel 90 satisfies NHRA and IHRA 90% specification for Top Fuel and Funny Car. Obviously not for your normal car. RPW also supplies this fuel for model car shops in Western Australia. http://www.rpw.com.au/Products/VP%20Fuels/VP001mainpage.htm

BadCompany350 · December 25, 2004, 01:25:33 AM

You got to rejet and do some carb mods to run alky. Run it with a castor oil or another oil that says it is ok to use with alky. Also, if you didn't know you need to purge your motor with gas at the end of the day. If your really serious, call up Dennis Packard and order some Lectron carbs, he knows his stuff.

Hoosier Daddy · December 25, 2004, 09:44:40 AM

cool thanks!