raptor problems

WOODY_450r · August 17, 2005, 01:10:41 AM

my 02 raptor wont go in 2nd gear does anyone know what is wrong with it

535banshee · August 17, 2005, 01:23:33 AM

its hard to say it could be alot of things the shift shaft might be bent or one of your shift forks could be bent.

WOODY_450r · August 17, 2005, 01:27:26 AM

it goes into 2nd but just reves up like if is in neutral

535banshee · August 17, 2005, 01:30:55 AM

does it go into all the other gears

WOODY_450r · August 17, 2005, 01:31:54 AM

ya just wont go when in 2nd

535banshee · August 17, 2005, 01:36:19 AM

you have broken 2nd gear in the transmission that is a big job the whole motor as to come apart what year is it

WOODY_450r · August 17, 2005, 01:38:58 AM

02 i beleive

535banshee · August 17, 2005, 01:40:57 AM

the 01 had transmission problems i have replaced alot of transmission in the raptor in my shop

WOODY_450r · August 17, 2005, 01:49:05 AM

how much is it

535banshee · August 17, 2005, 01:55:45 AM

the parts are not bad at all but the labor will kill you i am thinking about 500.00 plus parts

mrbones · August 17, 2005, 01:56:24 AM

Check out this site for some good info.

http://raptortranny.com/

535banshee · August 17, 2005, 02:01:40 AM

you can try doing it your self but if you have never done one you could fu@k it up even more had a guy try it himself and sent the rod threw the motor have a shop do it are someone that has done the job before

WOODY_450r · August 17, 2005, 02:13:32 AM

well mine has a bore kit in it would that have done anything

A.T.P. RACING · August 17, 2005, 02:04:19 PM

If you did a big bore or compression(ie 686 or 727) chances are that the extra torque that these kits produce will cause a transmission failure. If it is neutraling in 2nd gear, you have probably shattered the second gear cluster, or broken the engagement cogs at a minimum. Don't run or drive the quad. Chances are you have some pretty good size pieces floating around inside your cases.

Mike
ATP Racing

cutngrs · August 17, 2005, 02:48:38 PM

first thing first dran the oil out and look for metle parts on the dran plug if so big problem

WOODY_450r · August 17, 2005, 07:44:50 PM

thanks and i have 727 bore kit thanks everybody for your help

WOODY_450r · September 11, 2005, 05:08:58 PM

It was that 2nd gear messed up so i just bought a alba racing tranny thanks for the help

Chuck_Norris · September 12, 2005, 12:55:54 AM

Quote from: woodyraptor on September 11, 2005, 05:08:58 PM
It was that 2nd gear messed up so i just bought a alba racing tranny thanks for the help

I guess that is one way of fixing it

WOODY_450r · September 12, 2005, 12:58:14 AM

That is what the guy working on it said would be the best to do im not mad. It wold of been the same price just to get the stock tranny fixed.

raptor problems

Chuck_Norris