my banshee after big bore kit 400cc

[o4250]

girl thingy

I'm trying too think of something that will keep you fired up. Since you seem too be entertaining most of us.
Hold on I'll think of something too keep you going, just give me time.

[svtbolt04]

Guys, Arguing on the internet is pointless. I know one of you has already talked to me, but guys, is it really worth bickering and using personal combacks to offend the other person and get a possible ban?

I think you both are wise enough to calm down.

[o4250]

Guys, Arguing on the internet is pointless. I know one of you has already talked to me, but guys, is it really worth bickering and using personal combacks to offend the other person and get a possible ban?

I think you both are wise enough to calm down.

I've been calm the whole time.

[dirty1]

ok lets race...........

[attachment deleted by admin]

[dirty1]

oh wait im sorry, pick one of these and ill meet you anywhere.......

[attachment deleted by admin]

[svtbolt04]

The yellow one!! I have a radio flyer with a 5hp strapped on it and im ready to go!

[Old_School]

Back on topic. Ditch the T-5's and get CPI inframe drags if you want all out topend. -Mark

[Smoknbanshee]

back to the subject, stroke it and port it, CPI inframes, then you will get you some seat of the pants feel good and put out over 75 hp.  that is what i am talking about.

[dirty1]

ill have to admit the CPI pipes are the best performers on the Shee's

[Smoknbanshee]

well depends on what your motor is built for.....some motors perform better with shearer, cpi, rockets, etc....

[TurboBanshee_kid]

how much for the cpi's

post a site were i can get them at. Are they fatty's?

[01_DS650]

hey turbo banshee kid got yanked by my ds on our ocala trip

[leadsled]

HAHAHAHAHAHAH oh man to funny i believe on that final race between turbo banshee and 01_ds650, ds650 passed him with the one finger salute  still owning that POS shee lol j/k D


p.s. i still own you

[TurboBanshee_kid]

how much for the cpi's

post a site were i can get them at. Are they fatty's?

[Smoknbanshee]

man, i wish i would of known about the ocala trip, because i would of had to come out and redeem the banshee, because the only time my banshee has ever been behind a ds650 was when it was loaded on the trailer....

go to ebay and look for cpi's or go to planetsand.com and they have them for sale on there all day long....

[YAMAHONDAMAN]

Hey SMOKE ... Do you believe that it went 103 MPH with stock carbs' and a 14 front tooth ?  I Don't

[Smoknbanshee]

maybe with a 14 tooth rear sprocket....LMAO.....

Assumptions - your bike tops out at 10,000 rpm's and that is being generous with T-5 pipes.  You can pull all the gear that you will have to have to run 103 mph, again being generous that the motor can actually pull the tall 6th gear.  Here is what it would take.  I have the spreadsheet with gear ratio's to back it up.  And believe me you can ask anybody on this website, I might talk smack, but when it comes down to it, I got the paper to back it up.

20" tires here is the gear ratio to reach 103 mph.
14 front 32 rear 103.69 mph
15 front 34 rear 104.56 mph
16 front 37 rear 102.49 mph
17 front 39 rear 103.31 mph
18 front 41 rear 104.05 mph

22" tires here is the gear ratio to reach 103 mph.
14 front 35 rear 104.28 mph
15 front 38 rear 102.91 mph
16 front 40 rear 104.28 mph
17 front 43 rear 103.07 mph
18 front 45 rear 104.28 mph


that is the truth....if you want the proof, i will email it to everyone.  HOLLARRR
GET IT RAG

[leadsled]

cough* i beat the ds cough* and the other 2 shee's on the trip cough*

and turbos bike dont run 103mph cuz  i pull on him when he has 6th gear pinnd and i know my bike aint doin 103 maybe 80 sumtin

[Old_School]

how much for the cpi's

post a site were i can get them at. Are they fatty's?

Vito's performance (I think vitosperformance.net)is a banshee distributor. They are a bit pricey but pull like no other once you hit mid range and up. T-5's are nice and do give more bottom end but won't out flow CPI's. I can't even put my hands around the expantion their that big. But you have to cut your fenders a little to get them to fit and always have to wear pants as I've been burned several times on my frineds shee with them. -Mark

[01_DS650]

cough* i beat the ds cough* and the other 2 shee's on the trip cough*

and turbos bike dont run 103mph cuz  i pull on him when he has 6th gear pinnd and i know my bike aint doin 103 maybe 80 sumtin

yeah u got me only cause i didn't ride for a while before that trip but we'll run again after i practice my lauch and then we'll see.....

[leadsled]

excuses excuses i was surprised i was expecting better races from the other to banshee's seeing how someone had all this work done and still aint fast j/k

[dirty1]

i dont know where you guys are getting actuall mph.  the drag banshee i posted did 109mph in the 1/4 and topped at 118mph. so i dont see where 103 is comming from.

[01_DS650]

ok to clear this up turbobanshee kid doesn't have a 400cc banshee and it did not do 103. it did get alot of work done only because he seized a piston or something

and leadsled

[TurboBanshee_kid]

its a 386cc

hey mike before u talk sh*t get your bike running right and not over heating

[01_DS650]

its a 386cc

hey mike before u talk sh*t get your bike running right and not over heating

well thats funny even when its over heating it still beats ur pos banshee