Vinson wont run

Started by emtmike, November 08, 2009, 03:32:20 PM

Previous topic - Next topic

emtmike

I have a 2002 Vinson 500 auto. I don't use it much, mostly just for plowing in the winter. I am having problems with it and was wondering if I could get some help from you pros. It's hard to start. When it does run there is a hose that comes from the top of the carb and ends up under the seat that gas runs out of when its running. It will not idle without the throttle. If I shut it off, or stalls, the gas keeps coming out of the hose. I have to shut the gas off at the tank to get it to stop. There is also gas in the air filter box. Any ideas?

Baileygunns

Take the carb off and clean it... Sounds like its all gunked up from lack of use. Drain your tank while you're at it and put fresh gas in it.


OPowersports

Definately need to clean the carb and make sure you clean the needle and seat..
750 King Quad, VDI, M109R injector, HMF swamp series, Custom Front Sheave, 2mm shim, lime green spring, 20 gram rollers, 27" swamplites, Fully Snorkeled.

emtmike

Is there a website where I can get a rebuild kit?

OPowersports

bikebandit.com should have all the parts to that bike..
750 King Quad, VDI, M109R injector, HMF swamp series, Custom Front Sheave, 2mm shim, lime green spring, 20 gram rollers, 27" swamplites, Fully Snorkeled.

emtmike

OK I took the carb all apart and cleaned every nook and cranny. Well I took the  diaphragm cover and took the spring and jet needle and the other thing that looks like a crown, not sure what its called, out and shot carb cleaner all through it. I took all the other covers off and did the same. I put it all back together and put it in the bake and there is still gas pouring out of the hose that comes out under the seat and gas running into the filter. What the heck is wrong?   

svtbolt04

float needle seems to be sticking.
823 for life!



Black wheels, plastics, some shiny chrome pieces. Left over dirt from last year, handle bars.

emtmike

where is it located in the carb?

Baileygunns

Take the bowl off, its the little needle that clips to the tang on the floats, has a little rubber tip on it. Make sure your floats are moving free and not pinched in there.

MedicMudder

hey emtmike,if he bike  sits for long time periods you need to make sure you put ethanol tx in the tank.The  ethanol kills the carbs when they sit.
If you can't get this thing fixed send the Toy Doc a note.he is a sharp guy.     BTW were are you a EMT at?
Never forget 343.
2004 500 SPM
My son is a United States  Marine. :):) Semper Fidelis.
Proud member of the Mudd Butt Mafia
    VAMPIRES SUCK BLOOD TO LIVE, POLITICIANS DO IT CUZ THE ENJOY IT!!!!!!

Other Florida sites of interest: www.PinballShark.com