TNT ON DEC.30TH AND 31ST AT CR MOTORSPORTS SAND DRAGS

[cutngrs]

so do i and that the way its going to be

[535banshee]

the track will get a small amount of the fee to pay for the tear down. this is because the track has very little ways of making money to keep the track running. the gate fee goes to the park not the track. the racers will get 80% payback so that only gives the track 20% for income. this is not enough to keep it going. we have to come up with ways to make money and this teardown fee is one and buybacks is another

[Smoknbanshee]

and free labor is the other.  get r dun.

[535banshee]

and free labor is the other.  get r dun.

YES IT IS. IF IT WASNT FOR THAT AND A FEW SPONSORS THIS TRACK WOULD NOT HVE HAPPENED

[Smoknbanshee]

Agreed.  been there done that. 

[535banshee]

pipes are going on and one step closer to starting this thing. i should be starting this thing on friday.

[attachment deleted by admin]

[535banshee]

pic2 stingers on these pipes are BIG.

[attachment deleted by admin]

[535banshee]

TONY THIS IS THE RUBBER MOUNT. I HAVE ALOT MORE IF YOU NEED SOME.

[attachment deleted by admin]

[dynodon]

Looks good, Now you just need  start worrying

[Smoknbanshee]

Looks good, Now you just need  start worrying

that was good.

[Smoknbanshee]

jeff, are those lectrons you have on there?  or mikuni's?

[methyman]

39 Keihin PWK's

[535banshee]

WORRY! NO!  no need to worry about how i am going to spend all your money after i put the smack down.

[dynodon]

WORRY! NO!  no need to worry about how i am going to spend all your money after i put the smack down.

Blah, hahahahahahahahahahhahahahaha, I would hope that you could. You have a 18 mil, and I a little 4 mil !!!! < bUT IF i DO WHOOP THAT AZZ, YOU KNOW YOU ARE not GONNA LIVE IT DOWN

[535banshee]

what you mean little 4mil. they run 3.50's from what i heard.

[Hoosier Daddy]

yeah with no rider and remote controlled! 

[535banshee]

HATS WHAT I SAY TOO

[Smoknbanshee]

i hear they are running 3's with fat boy's on em too.

[cutngrs]

hay chris get with don on your flat track drag race rules  so we can get done on papper and then post it on here

[Hoosier Daddy]

Its pretty simple

FT front tires, sway bar, knobbies on rear, nothing longer than a stock swinger... (most of us run -? swingers anyway. My brother runs a -5" on his banshee... but yet he runs a 421 cub with a single 38mm carb.. now that should be interesting....
Were trying to keep it where they are true flat track bikes and not someones drag bike made to "look" like a flat track bike... Im just looking for ways for all of us to meet new people and do other things besides turning left all the time...

[tribal_shee]

what you mean little 4mil. they run 3.50's from what i heard.

  this is true for certain 4 mills where builders are tweeking them day in day out, not for the average 4 mill with blaster weisco pistons. they might be blaster pistons but stock blaster is still 68 mill bore. not saying it's not gonna fly just saying don't be diappointed not to be running in the 3's

[LT-R450ApK]

Looks Like A Few of us FT guys are goin to come out and play!!!
I wanna Ride That Fast Orange thing,Looks Like Troy has Got him a lil summin

[dynodon]

what you mean little 4mil. they run 3.50's from what i heard.

  this is true for certain 4 mills where builders are tweeking them day in day out, not for the average 4 mill with blaster weisco pistons. they might be blaster pistons but stock blaster is still 68 mill bore. not saying it's not gonna fly just saying don't be diappointed not to be running in the 3's

Lupo, I know it wont run the 3`s, we are just BUSTIN Jeffs balls a little!!!!!!
We have to have some fun , RIGHT ?!?!?!?!?!?!

[535banshee]

what you mean little 4mil. they run 3.50's from what i heard.

i was being a smart a$$

[cutngrs]

i will bet money  that this 4 mill will run 3$