new sand drag track

535banshee · October 15, 2006, 09:23:38 PM

LAST ONE

[attachment deleted by admin]

dynodon · October 15, 2006, 09:25:43 PM

Can anyone say HOOKED ON PHONICS

?
Loud---- not load
Lose-Not loose

Man I am telling you, NON spelling fools

dynodon · October 15, 2006, 09:30:46 PM

We did however, manage to get some things accomplished today!!! Things are moving along pretty good.
Thanks to all who came out to work today !!!! Every little bit helps !!!!!!!!!!!!!!

Now after we get the water and timing system installed, we should be sitting pretty good

535banshee · October 15, 2006, 09:47:30 PM

I HAD PUT LOSE AND MY WIFE WALKS BYE AND SAYS IT LOOSE. I KNOW I WAS RIGHT

dynodon · October 16, 2006, 07:02:36 PM

yeah, yeah, what ever you say. I know she is smarter than that !!!!!!

Smoknbanshee · October 16, 2006, 07:26:42 PM

Quote from: dynodon on October 16, 2006, 07:02:36 PM
yeah, yeah, what ever you say. I know she is smarter than that !!!!!!

yu think she is? she maried him and did nut turn him lose.

LMFAO...that is good right dur

535banshee · October 16, 2006, 10:53:17 PM

the was a good one. i had to beat her last night for that one

dynodon · October 16, 2006, 10:57:24 PM

Quote from: 535banshee on October 15, 2006, 09:04:21 PM
FOR TROY

Whats the big WHITE spot from

??
I think you need to quit jackin while on the puter

Smoknbanshee · October 17, 2006, 01:15:16 AM

Dyno, that is funny right dur two.....

it looks like something got turned loose.....

535banshee · October 17, 2006, 01:36:31 AM

tires and axle were added today

[attachment deleted by admin]

535banshee · October 17, 2006, 01:37:30 AM

axle

[attachment deleted by admin]

dynodon · October 17, 2006, 01:42:11 AM

Hey Smokie, check out the little ankle biter

535banshee · October 17, 2006, 11:37:15 PM

here is some pics of rippers

[attachment deleted by admin]

535banshee · October 17, 2006, 11:38:29 PM

pic2

[attachment deleted by admin]

535banshee · October 17, 2006, 11:40:02 PM

pic for don

[attachment deleted by admin]

dynodon · October 18, 2006, 12:05:42 AM

Those are pretty sweet !!!

Smoknbanshee · October 18, 2006, 10:05:36 AM

Quote from: 535banshee on October 17, 2006, 11:37:15 PM
here is some pics of rippers

that motor going to be able to pull those rippers?

dynodon · October 18, 2006, 07:02:09 PM

Quote from: Smoknbanshee on October 18, 2006, 10:05:36 AM
Quote from: 535banshee on October 17, 2006, 11:37:15 PM
here is some pics of rippers

that motor going to be able to pull those rippers?

And the "ANCHOR"

535banshee · October 19, 2006, 12:33:05 AM

UPDATE ON TRACK- WE ARE GOING TO BE PUTTING THE WELL IN THIS WEEKEND FOR THE WATER SYSTEM FOR THE TRACK. CHRIS IS GOING TO BE PUTTING IN THE A/C UNIT AND FINISHING THE INSIDE OF THE STARTER STAND. NEXT WEEKEND WE ARE PLANNING ON PUTTING IN THE WATER SYSTEM. I THINK 12 HEADS DOWN THE CENTER OF THE TRACK SHOULD WORK GOOD TO KEEP THE TRACK NICE. THIS WAY WE DONT NEED TO PULL A WATER TRAILER DOWN THE TRACK ALL THE TIME.

dynodon · October 19, 2006, 12:07:26 PM

Dang dude, Quit YELLING at us !!! Take the caps lock OFF!!!!
We also have been told on another site (bansheehq) that there are quite
a few of the Miami boys that are willing to put Paddles on to race with us !!

Its on like Donkey Kong Boys !!!!!!!!!

tribal banshee · October 20, 2006, 02:24:27 AM

Quote from: Smoknbanshee on October 18, 2006, 10:05:36 AM
Quote from: 535banshee on October 17, 2006, 11:37:15 PM
here is some pics of rippers

that motor going to be able to pull those rippers?

your not lieing!!!!!!!! at least we won't have to worry about that bike now. Half track it's gonna be bye bye

tribal banshee · October 20, 2006, 02:28:28 AM

jeff I'm sure you guys know what your doing but just make sure you put in a big enough well pump or pressure will suck trying to go 300 ft of rotors. better to have too much than not enough when it comes to water

dynodon · October 20, 2006, 12:25:15 PM

Yeah, Lupo, the guy is a well, and sprinkler guy. So he has already covered that with us too!! Thanks for the heads up though !!!!

535banshee · October 20, 2006, 08:17:01 PM

i put those 22x11x8 12p rippers on a 535 and they pulled them with no problem. i know my 18mil will pull them with no problem. when you have 180hp (with 30 shot of nos) i dont think its going to lay down half track

535banshee · October 20, 2006, 08:24:45 PM

Quote from: tribal banshee on October 20, 2006, 02:28:28 AM
jeff I'm sure you guys know what your doing but just make sure you put in a big enough well pump or pressure will suck trying to go 300 ft of rotors. better to have too much than not enough when it comes to water
[/quote

you do the track in zones. the track should have 2 to 3 zones. if the well will handle 16 gals a min. than you will run 4 heads at a time, which is 12gal a min. this way you have pressure and and your not running the well dry. this is what the water guy that is doing it says