Raptor 350 Shifter

[DZ 350]

i have a raptor 350 and the werid thing is that the shifter isn't connected straight to the motor, it is conected to a metal rod that is like a inch long and that little rod broke off the ball joints that is on there, and was wondering if any knows a good site for this part to get one, or if anybody has one that they don't want, or if anybody knows how to fix it , i have the rod still on there and RAD 700r's dad rigged it by putting a bolt there to connect it to the motor and was wondering if that would be fine to ride on for a while until i get the new shifter kit? and if anybody knows were i could find a shifter that comes straight out of the motor at a 90 degree angle and come out at like 45 degree angle or something quite like that, that would be much better then that little rod linkage.

thanks dustin

[RaptItUp]

I have a stock shifter from my '04 Raptor 660 that sounds like it is the same setup.  Does yours attach to the inside of the foot peg?
I thought that setup was sloppy so I bought a Pro Design billet 1 pc that comes directly off the shift shaft (no linkage and ball joint) now it shifts a lot better.   I would recommend replacing it with a 1pc.  They are about 60 - 80 bucks.  Got mine off E-bay, but a lot of the parts places in Dirt Wheels have them.  Try ALBA or Rocky Mountain ATV supply.   I would give you my stock one for free if it is the same part for 350 and 660.  You would have to pick it up or pay for shipping.  I have a feeling that with the different engine, the shifter length or angle would be different.

[DZ 350]

I have a stock shifter from my '04 Raptor 660 that sounds like it is the same setup.  Does yours attach to the inside of the foot peg?
I thought that setup was sloppy so I bought a Pro Design billet 1 pc that comes directly off the shift shaft (no linkage and ball joint) now it shifts a lot better.   I would recommend replacing it with a 1pc.  They are about 60 - 80 bucks.  Got mine off E-bay, but a lot of the parts places in Dirt Wheels have them.  Try ALBA or Rocky Mountain ATV supply.   I would give you my stock one for free if it is the same part for 350 and 660.  You would have to pick it up or pay for shipping.  I have a feeling that with the different engine, the shifter length or angle would be different.

if u could ship the stock one to me i will pay for the shipping it might just work, if not a friend of mine dad is a handy man a will torch it to make it fit , i will have to look into it...

[MOTOCROSS MAVERICK]

the same thing happened to me with my 350. i just went to the dealer ship and ordered the parts.

[RAD 450r]

http://houseofmotorcycles.bikebandit.com/partsbandit/oem_schematic_view~schem_dept_id~1121625~section_dept_id~1~section_dept_name~OEM+%28Stock%29+Parts~dept_type_id~2~model_dept_year~2005~model_dept_mfr~Yamaha~model_dept_id~1119511~model_dept_name~YFM350RT+RAPTOR+350.asp



Here you go, order the parts that you need