Got the 2006 TDR banshee engine back!

Started by TurboBanshee_kid, January 20, 2006, 09:21:32 PM

Previous topic - Next topic
Print
Go Down Pages1
User actions

TurboBanshee_kid

January 20, 2006, 09:21:32 PM
2006 banshee carburetors with purple hoses.
2005 banshee cylinders with STD'S wiseco pistons.
2006 wiseco crank it was welded.
2006 Billet Hinson clutch basket.
2006 Ricky Stator flywheel.
2006 Ricky Stator 200 watt stator.
2005 Banshee head milled  .40 over or 40 over.


[attachment deleted by admin]
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs

TurboBanshee_kid

#1
January 20, 2006, 09:25:47 PM
Thank you Tony Doukas Racing

New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs

TurboBanshee_kid

#2
January 20, 2006, 10:22:23 PM
No one has any thing to say?
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs

Hawgin4x4

#3
January 20, 2006, 10:27:56 PM
sweet!
I dont disrespect anyone, If anyone disrespects me, You will be 6 ft below me.

klutchbuster400

#4
January 20, 2006, 10:28:32 PM
alls i gots to say is ............


DAAMMNN!!!

TurboBanshee_kid

#5
January 20, 2006, 10:41:54 PM
Thank you tony had it for 2 weeks.
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs

The Quad FaJa

#6
January 20, 2006, 11:03:20 PM
Looks good....what was the cost for all the work and parts?...and only 2 weeks....hard to find people who can do turn around service like that!...

Smoknbanshee

#7
January 21, 2006, 07:53:45 AM
tdr does good work, but the head was milled .40 off of it, to raise your compression is what you mean right?  stock head i assume....they mill .4 off the head which decreases the amount of volume per cylinder thus raising your compression....

if you wanted to see a noticeable difference, you should of had TDR port the motor....then you will be like DDDAAAAMMMMMM
Team FBI (Florida Boy's Inc.)
A$$ Crack Racing
Choke on my Smoke!

TurboBanshee_kid

#8
January 21, 2006, 08:30:57 AM
Yeah but i Only had $1000 and that is what all that stuff came out to be.

So i really have a 2006 banshee engine >:D

4 or 5 years down the road when i need a new top end i will do port work.

Maybe sooner if i get $300 saved up!

Thank you quad faja for all that good info. :)
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs

2006YFZ450

#9
January 21, 2006, 08:38:35 AM
Sweet looks awsome ;)
'06 YFZ 450
'03 F150 SVT

[url="http://www.sponsorhouse.com/members/2006YFZ450"]http://www.sponsorhouse.com/members/2006YFZ450[/url]

TurboBanshee_kid

#10
January 21, 2006, 09:04:48 AM Last Edit: January 22, 2006, 06:57:27 PM by TurboBanshee_kid
Thank you 2006YFZ450 ;)
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs

Toomey

#11
January 21, 2006, 09:43:27 AM
That is a good idea having such a new motor, built by a very good shop like TDR.  It should be very very reliable.  The port work makes a big difference too by the way.  After pipes, it's the main way to increase power.
Looking for a junker dirt bike project.

Dr.Dirt

#12
January 21, 2006, 01:05:48 PM
Think that thing would fit on my Blaster?  >:D  Looks cool.

TurboBanshee_kid

#13
January 21, 2006, 11:40:16 PM
I don't know :D
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs

Honda250ex

#14
January 22, 2006, 12:59:51 AM
Thats a sweet engine
'03 F-250 7.3L
Lawn Service 4Sale w/equipment!!
98% of all ATV'ers FLOOR their quads if your the 2% then your GGGGGGGGGGGGGG@@@@@@@@@@yyyyyyyyyyyyyyy

Yamaha72

#15
January 22, 2006, 08:59:32 AM
Man thhat is a nice engine..... Can anyone say 5th gear wheelies???

TDR rules, they are a great company!!!!!!!!!!
2003 Yamaha Raptor 660

2005 Ford F-150

DZ 350

#16
January 22, 2006, 09:44:24 AM
that motor looks sweet! :ThumbsUp.gif
-05 raptor Alot of Stuff done to it ( FOR SALE !!!!! )

-98' CHEVY 4X4 SILVERADO W/ TO MUCH TO LIST !

-2007 RINCON 680 4X4 W/ WARN BUMPER, HMF PIPE, AND 26" OUTLAWS

-1987 Jeep Wrangler On 44" tractor Tires ( For Sale )

-2001 F-150 on 9" lift 36" TSL's (For Sale)

KD 428

#17
January 22, 2006, 11:54:43 AM
nice engine, it looks sick!
HONDA CRF450R
Print
Go Up Pages1
User actions
Other Florida sites of interest: www.PinballShark.com