how to wheelie a raptor 350

[jon457]

yes i was wondering what do i have to do to wheelie a raptor 350

[bigb]

put your helmet on, sit a little further back on the seat than you normally would. pull the clutch and put it in 1st gear mash the gas all the way give it a second to build some RPM and slide your finger off the clutch, that should get you started.

[big-daddy]

jon457, didnt listen to bigb  you will be on your back.

[jon457]

oh ok so how do u do it then

[klutchbuster400]

just shift your weight back, pucnh it and pull the bike back. who needs a clutch anyways lol

[bigb]

i just told you how to do it. just make sure to use your helmet.

[big-daddy]

just shift your weight back, pucnh it and pull the bike back. who needs a clutch anyways lol

I say the same about brakes... jon457, klutchbuster350 has the right idea.

[klutchbuster400]

just shift your weight back, pucnh it and pull the bike back. who needs a clutch anyways lol

I say the same about brakes... jon457, klutchbuster350 has the right idea.

thanx, i learned from the best * gery350* lol

[dirty1]

Go find your fattest friend put a pillow in the back of his shirt and put him on the back of the bike, no hit the gas and lean back untill he screams then let off a little

[svtbolt04]

Man, I thought EVERYONE knew how to pop a wheelie...

[jon457]

well i am new to this i kind off already have the hang of it i just got to work a lil better on it im almost there thank to some you for helping me

[apkkfx400]

You can use the clutch, especially if you're doing a wheelie from a stopped position-don't know any other way.  You really don't have to rev up engine too much-releasing clutch handle and giving it gas at the same time is your best bet-too much gas you'll end up on the grab bar.  It will take a while but you'll find the quads balance point-it's that point where it almost feels like it will go all the way to the grab bar but doesn't-hard to explain but you'll know when you find it.  Also, don't shift into higher gears with clutch when popping a wheelie-front wheels will fall back down almost every time when upshifting w/clutch.

[01_DS650]

the best way to learn how to wheelie is first go all the way back and learn that doesn't hurt. Then a wheelie is all about throdle control not leaning. if u have to u can use the rear break to keep it from going to far back and thats about it . its all about practice. I can wheelie my big ds650 and i have to say thats way harder than a samller sport bike

[rubicon500kid]

how do i wheelie my rancher lol i already tried it by  standing on the back rack and mashin the gas but just went normal

[klutchbuster400]

lol my freind wheelies his dads wolverine, basically put one foot on the back bar, keep your foot on the shifter, put it into second, then click it down and hold it down into first, rev the crap out of the gas and let go of the shifter, itll come up, but i dont reccomend doing this alot, its like the same thing as popping the clutch but there could be consequenceas 2 it that i dont know about

[ppark350se]

you just do it.

[L.E._YFZ_2005]

the bike wants to come up just  lean back as you hit the gas.. or find some woops and   punhc it  going over each one and get the feel  warning though  once you get use to it you wont  dirve with 4 wheels ever ont he ground lol

[BlueRaptor700R]

Its natural.  Hardly anybody can tell you how to do it.

[Honda250ex]

Hold clucth and floor it and pop the clucth

[Honda250ex]

Shut up That what happend to you whene you listen too atv action RIDING TIPSE.

[BigRanger]

Just keep practiceing, thats what I did and now I can ride them all day. You can even get the 350 up in 4th if you stand on the back with one foot and rev the hell out of it then pop the clutch. I'm hoping with new filter, pipe, and jet kit, the thing will come up in 2nd with no clutch. I'll find out in a couple weeks.