***JUST A HEADS UP ON 06YFZ'S***

Started by 53yfz450, October 07, 2005, 10:21:04 PM

Previous topic - Next topic

53yfz450

WEB SITE IS COMING BACK UP SOON!!!!!!!!!!!!!!!   
  [url="HTTP://gandgracing.com"]HTTP://gandgracing.com[/url] CHECK IT OUT!!!!!!

[url="http://myspace.com/jakegunn53"]http://myspace.com/jakegunn53[/url]

motocross is all about momentum if you hit it doin a 100 ya gonna  make it across.

Da_Mtg_Man

Thanks a bunch. Hopefully everyone with an 06 yfz sees this. :ThumbsUp.gif
FLORIDA MUD RIDER

53yfz450

WEB SITE IS COMING BACK UP SOON!!!!!!!!!!!!!!!   
  [url="HTTP://gandgracing.com"]HTTP://gandgracing.com[/url] CHECK IT OUT!!!!!!

[url="http://myspace.com/jakegunn53"]http://myspace.com/jakegunn53[/url]

motocross is all about momentum if you hit it doin a 100 ya gonna  make it across.

jaxdawg

wow thats interesting.  but why doesn't yamaha fix that?

o4250


53yfz450

maybee because its an easy fix, im sure if one of those bolts vibrate loose and cause some serious damage they will recall it. :-\
WEB SITE IS COMING BACK UP SOON!!!!!!!!!!!!!!!   
  [url="HTTP://gandgracing.com"]HTTP://gandgracing.com[/url] CHECK IT OUT!!!!!!

[url="http://myspace.com/jakegunn53"]http://myspace.com/jakegunn53[/url]

motocross is all about momentum if you hit it doin a 100 ya gonna  make it across.

53yfz450

yeah but if this is yamahas falt they would have a reacall you probabbly wont need a warranty.  and it wont last 6 months those bolts look like they would fall out very quickly.
WEB SITE IS COMING BACK UP SOON!!!!!!!!!!!!!!!   
  [url="HTTP://gandgracing.com"]HTTP://gandgracing.com[/url] CHECK IT OUT!!!!!!

[url="http://myspace.com/jakegunn53"]http://myspace.com/jakegunn53[/url]

motocross is all about momentum if you hit it doin a 100 ya gonna  make it across.

Bigscrb15

i think this might make a good sticky in the the tech corner for when it falls off the front page here
"When once you have tasted flight, you will forever walk the earth with your eyes turned skyward, for there you have been, and there you will always long to return."

53yfz450

yeah wait till you really start riding that raptor im sure their will be a recall on it soon.
WEB SITE IS COMING BACK UP SOON!!!!!!!!!!!!!!!   
  [url="HTTP://gandgracing.com"]HTTP://gandgracing.com[/url] CHECK IT OUT!!!!!!

[url="http://myspace.com/jakegunn53"]http://myspace.com/jakegunn53[/url]

motocross is all about momentum if you hit it doin a 100 ya gonna  make it across.

jaxdawg

but the raptor would have the same kind of thing in it right

53yfz450

WEB SITE IS COMING BACK UP SOON!!!!!!!!!!!!!!!   
  [url="HTTP://gandgracing.com"]HTTP://gandgracing.com[/url] CHECK IT OUT!!!!!!

[url="http://myspace.com/jakegunn53"]http://myspace.com/jakegunn53[/url]

motocross is all about momentum if you hit it doin a 100 ya gonna  make it across.

superstar

Why would they be loose, and who wants to pay that kind of money to just have to go home tear it down and basically rebuild it it from the floor up. Tighten every nut and bolt??? Thats a joke right.

53yfz450

i dont know how yamaha could have missed this but they did. i know i always check every bolt on my bike very often you never know what could vibrate loose. ???
WEB SITE IS COMING BACK UP SOON!!!!!!!!!!!!!!!   
  [url="HTTP://gandgracing.com"]HTTP://gandgracing.com[/url] CHECK IT OUT!!!!!!

[url="http://myspace.com/jakegunn53"]http://myspace.com/jakegunn53[/url]

motocross is all about momentum if you hit it doin a 100 ya gonna  make it across.

superstar

After its had some ride time of course, but off the show room floor.Thats ridiculous. This is some excellent info. Personally id be sure to mention it the day i bought one, and stand there and watch em fix it. Can you say PREP FEES??. Fellas you are paying for the fact that this bike has been set up (prepped).

dvx400#1

yamaha should fix this problem after all you have to pull the stater and the idle gear or something like that to tighten those screws.    :o

TRX450R_Racer

I went over my whole quad the day I brought it home. I even took out the swingarm bolt and disassembled the rear link to grease everything up really good. If you ever had to beat a stuck swingarm bolt out you can understand why I tore it a part. By looking at the picture om GT Thunders site it doesn't look that hard to get at.
Member of South East Florida Trail Riders

Life's to short, wear a helmet.
Dress for the crash, not for the ride.
Ripped off by Brandon George.

jaxdawg

well this is the first year that they have done fuel injection.  it will be interesting to see what yahama will do about this next year in the 2007's

svtbolt04

Those are not hard to get to, the gear comes right out. Slides right back in. I accidently pulled it off because I thought it was my oil filter and when I pulled it off, I saw those two screws, but didnt know about that problem untill last night.
823 for life!



Black wheels, plastics, some shiny chrome pieces. Left over dirt from last year, handle bars.

svtbolt04

Opened it up today, WHOA!!! they were almost out. If you have a YFZ, look at them even if you dont have a 06.
823 for life!



Black wheels, plastics, some shiny chrome pieces. Left over dirt from last year, handle bars.

01ZX12R

Check all of the stator cover bolts at the same time. I rode my 06 for the first time for about 1/2 hour and when I was cleaning it up I noticed that it was missing 5 bolts out of the stator cover. I  then pulled off the starter gear cover to find the 2 bolts behind there loose as well.
K&K Motorsports 
Full Spectrum Racing
06' YFZ450  #12
08' KFX450  #21
08' LTR450   #132

Ride1Rob

I've had my bike for 2yrs now and ride it pretty hard. I've never checked those bolts but when I get my bike back I'll check them. If their loose at least then we'll know they won't come out.
If it'll run... I'm ridin'!!!

MOTOCROSS MAVERICK

on my new 06 i checked the bolts an hour after i bought the bike and the bolts were loose! with not one ride on it they were loose, but east to fix with a little medium hold locktite! ;)
[url="http://www.sponsorhouse.com/Members/MOTOMAV/Home.aspx"]http://www.sponsorhouse.com/Members/MOTOMAV/Home.aspx[/url]

2006YFZ450

Well I opened it up and the bolts were tight but needed some elbow-grease to make it from vibrating loose again I'll see if they get loose after a couple more rides :-\
'06 YFZ 450
'03 F150 SVT

[url="http://www.sponsorhouse.com/members/2006YFZ450"]http://www.sponsorhouse.com/members/2006YFZ450[/url]

johnyfz450

Check your axle spikes were they lock into the sprocket there starting to chip off.I have 15 hours on mine. >:(

2006YFZ450

Quote from: johnyfz450 on January 14, 2006, 06:36:24 PM
Check your axle spikes were they lock into the sprocket there starting to chip off.I have 15 hours on mine. >:(

I check it out thanks man ;)
'06 YFZ 450
'03 F150 SVT

[url="http://www.sponsorhouse.com/members/2006YFZ450"]http://www.sponsorhouse.com/members/2006YFZ450[/url]

Other Florida sites of interest: www.PinballShark.com