Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - bocephus300

#1
Open Discussion / Re: brimstone recreation in tenn.?
August 25, 2009, 04:40:02 PM
is it good for both sport and utilitys? it looks good on the site, with alot of trails and acomidations..  just wanted some first hand experiance
#2
Open Discussion / brimstone recreation in tenn.?
August 23, 2009, 10:20:38 PM
i been wanting to ride somewhere different.. i been all over florida, and to georgia a few times. anyways my buddy is going to this place in tennisee and he gave me some website brimstonerecreation.com have any of yall been there? like im in broward and tennisee is a long roadtrip for a not so great place. just looking for advise and oppinions
#3
when i paid off my honda they sent me a letter saying it was paid in full.. but it would have a electronic title to save paper!    then i had to request a paper title from the my florida website for free.
#4
yea this project is definately not reccomended!
#5
what a enormous pain in the butt this project was...and continues to be.   got it all in and it all works it seems just need to get a new tie rod!   i will think twice before offering to help next time!     thanks for the suggestions also guys!
#6
by the way its a dana 44 front, with coil spring buckets. we would like to keep the coil springs.
#7
i am helping a friend...
he has a 94 f 150 thats 2 wd, that he recently bought. it has some serious issues up front, its been hacked up pretty good and cant be allined.  it has lift coils, coil spacers and some ghetto fab "lift kit", its a real mess. my bright idea was maybe we should just put a strait axle and call it a day, he calls me today, he bought the front end. has anyone here done this type of swap? and have any advise besides run away?
#8
Open Discussion / Re: ATV GUYZ in Davie
May 05, 2009, 05:49:36 PM
cool memorial day you down for ryc?   
#9
honda by far!   the popo is a little faster and is alot smother... but the homda makes up for in reliability.... i have had both bikes and like both but if i had to keep one it would be the honda fo sho!
#10
Open Discussion / Re: ATV GUYZ in Davie
May 03, 2009, 09:11:11 PM
a hahaha he did tell me my outlaws suck! he said his mudlites are the best tire ever? lol... i was a little offended also.  what are you shopping for?
#11
Open Discussion / Re: ATV GUYZ in Davie
May 02, 2009, 01:19:27 PM
really? i met the owner at ryc.. he seemed cool. what happened bro?
#12
you may be right! i live off 145th st..  and were going on a night ride tonight
#13
and that red gas tank is not staying there.. im having a aluminum one made the same size just almost double the height.. and a water tank/ step box all the way up front
#14
yea its about 6 ft tall now, but it has ten inches of blocks out back and some homemade stuff up front(like a foot long schackle and a 8 inch drop on the front)  all that jazz is getting cut off this weekend abd put back to stock height.. finished height is going to be around 5-11 - 6ft with a set of 49's on it
#15
i finally was able to get some pictures..












#16
#17
yea i  think thats what im going to do. thanks!
#18
im planning on using the power boster..
#19
what it i leave the small res empty.. and only use 1 output?
#20
that was gonna be another question too, i dont see why that wouldnt work either
#21
thanks.. i seen another buggy with the same type system and it had a bolt blocking one of the pressure outlets.. id rather ask and figure it out before i waste money on something that wont work
#22
so the buggy project is coming along pretty well. i dont have a digatal camera so i dont have any new pictures... i have all my drivelines done, suspension done, risers done, all supports for outer deck done also. i ran marine cables for the shift linkage and throttle. it running and driving now which, brings me to my next problem. the d-60's have disc brakes up front and drums out back(which need to be rebuilt if kept). i got a hold of a willwood 6 piston disc/caliper combo, and since i have a extra yoke on one of my transfer cases, i want to use that instead of the axle mounted system. part 2 of my question is that my master cylinder/booster is the stock one from a old f250. it has 2 pressure outputs now, can i just use one and put a bolt in the other one or is there some other way to make it work?

                                    thanks in advance
#23
Open Discussion / Re: L-Cross or Bamboo
February 24, 2009, 10:44:44 PM
looks as if i will be taking the buggy my loan shark brother is giving me the money to finish it! and i will be bringing a few lovely ladies with me... so it will be gooder than heck. and my buddie dave taking his 2.5ton bronco. my cousin will have his little green buggy out there. and a few friends with their ghetto bob mud truck
#24
ill be there fo sho! with friends.

civcord you should go too! break in that new bike of yours
#25
im not to sure about the no campfire rule either... its been pretty cold lately
Other Florida sites of interest: www.PinballShark.com