Main Menu

clutch help

Started by gotballs82r, September 28, 2008, 04:48:08 PM

Previous topic - Next topic

gotballs82r


Went riding yesterday and when i started rippin down the trail i felt the clutch slipping. So i adjusted the cable and the other adjust spot on the motor still no luck. It got worse soon the bike just stopped would not move. what does this sound like to you .I think it is the clutch plates. But their was not much warning of it going out it rode strong last time out. Does this sound normel to you the clutch going from riding slipping to not able to move the bike with no rider on it.And when bike is off and in gear you can push the bike almost like it is in neutral.

rider

sounds like you need some new plates, or you have a really stretched cable.
98% of the teenage population will try or does smoke pot. If you're one of the 2% who hasn't, copy & paste this into your signature.

Turboderf

sounds to me like you need a clutch job good luck

TRX450R_Racer

Make sure you get the fibers, metals and springs.
Member of South East Florida Trail Riders

Life's to short, wear a helmet.
Dress for the crash, not for the ride.
Ripped off by Brandon George.

z400250

did you just change the oil??????
[url="//www.tampabayridindirty.com"]www.tampabayridindirty.com[/url]

Other Florida sites of interest: www.PinballShark.com