Rim question

[topflight36]

How do I find out my lug pattern. I have a Roketa and want to know how to figure out what size bead locks to buy. I take it that you messure from hole to hole cross rim. But if that is correct then what part of the holes do I messure to. Thanks for your help guys.


Tom

[TRX450R_Racer]

You measure from center to center.

[greenmachine]

Measure from center of the holes across the center of the rim. Take that measurement in inches then multiply it by 25.88mm.
EX:4 1/4 inches across  centers on a 4bolt pattern would be 4.25 x 25.88mm=109.99 or round up of course & it is a 4/110 pattern.

I hope this helps. You can also go to recreation tire wheel website & print off bolt patterns , cut them out & try them on your wheel. My way is perfect & easier.

[greenmachine]

4/110 is all honda/suzuki sportquad rear wheels I beleive.

Another example Honda/Suzuki front wheels on sport quads are 4/144 pattern.
These wheels measure just a little over 5.5" across centers.
ex:5.5" x 25.88mm = 142.34 round to nearest pattern & you get 4/144.

[topflight36]

green thanks for the examples. Now the question is what are some cheap bead locks. I Dont need the best. I will be racing this bike in quad scrambles So I just want something better then stock rims I think. Or should I put my money somewhere else right now. The bike is stock. Thanks for your help guys

[Chevy1500z71]

i wouldnt put to much money into that bike... how much did you pay for that thing? whats it top out at 45mph?

[topflight36]

hey Kaw why dont you read my signiture. Dont hate lol. Just remember that Jap bikes were called cr*p at one time. But mine runs with the best and I even rode with a Kfx400. Kept up with him through the woods. So do me a favor and if you hate dont post on my trends. Thanks

Ps Thanks TRX and Green for your help