Waldo MX or some other place Mid June

Started by 400exRacer77, April 27, 2005, 07:41:07 PM

Previous topic - Next topic

400exRacer77

Iv'e begun to weld and grind and sand and everything else u can think of to put my quad together. i should have it done right around the end or may or early june. who wants to plan a ride at one of the good mx tracks. i mentioned waldo cause the first and last time i went it was like 10 degrees outside i went aorund the track 3 times, started to haul butt and 4th lap i flipped my quad 4th gear topped and didnt ride for 2 weeks. let me know
2000-03 CRF450EX ..... Houser +3 LT a-arms and +1.25 swingarm, Custom Axis fully adjustable suspension front and rear, Walsh radiator, Douglas wheels, CRF450 motor, not quite done yet though......

dreth

were thinking of a group ride to hard rock mx around that time if that is ok with you

Hollywood

I'll be doing the group ride at Hard Rock but I am up for a trip to Waldo anytime it's just ride down the road for me.  ;D
'99 4??EX: Laeger +2's, Elka Resi's, Tag bars, AC ProPeg, Sparks X6 exhaust, G-Force axle, Burgard stem/carrier, 250r Hood, Klaw MXR's, ATP Racing engine, LSR, MSR, PEP and the list goes on.

'03 Honda 250EX: Yea it's decked out too!

'03 Yamaha Blaster: Work in pr

400exRacer77

either or sounds great ill keep updating on whats being done to my bike im about to go work on it right now.
2000-03 CRF450EX ..... Houser +3 LT a-arms and +1.25 swingarm, Custom Axis fully adjustable suspension front and rear, Walsh radiator, Douglas wheels, CRF450 motor, not quite done yet though......

Hollywood

'99 4??EX: Laeger +2's, Elka Resi's, Tag bars, AC ProPeg, Sparks X6 exhaust, G-Force axle, Burgard stem/carrier, 250r Hood, Klaw MXR's, ATP Racing engine, LSR, MSR, PEP and the list goes on.

'03 Honda 250EX: Yea it's decked out too!

'03 Yamaha Blaster: Work in pr

Mrs.Nightbreed

 
QuoteIv'e begun to weld and grind and sand and everything else u can think of to put my quad together. i should have it done right around the end or may or early june. who wants to plan a ride at one of the good mx tracks.

You sound like me!!!! ;D  I feel your pain ;).   Mike and I had to quad-share at the last group practice and at the race this weekend.  His quad is nice and all, but it's not mine :'(   I am looking at 2-3 more weeks too. After riding his with suspension, I am going to set mine up right before it goes back together.

 Either track sounds great. We will be there even if I still have to share [smiley=ThumbsUp.gif]  

400exRacer77

Ha, i'm putting my motor together this weekend and then puttin all the new mounts into my frame after that.... i gotta get it PC'd when i get my motor all fit in there and then after PC LETS RIDE! ..... what suspension r u gonna go with if u do it?
2000-03 CRF450EX ..... Houser +3 LT a-arms and +1.25 swingarm, Custom Axis fully adjustable suspension front and rear, Walsh radiator, Douglas wheels, CRF450 motor, not quite done yet though......

Hollywood

Well then yall quit talking and get to work so we can ride! lol  ;D
'99 4??EX: Laeger +2's, Elka Resi's, Tag bars, AC ProPeg, Sparks X6 exhaust, G-Force axle, Burgard stem/carrier, 250r Hood, Klaw MXR's, ATP Racing engine, LSR, MSR, PEP and the list goes on.

'03 Honda 250EX: Yea it's decked out too!

'03 Yamaha Blaster: Work in pr

Exmx54

I'm up for hardrock or waldo, both are sick tracks, I think a group ride through the rollercoaster at hardrock would be really fun!  ;D

lawn_man mx

im down for hard rock  never been there  hear  good things about it  how far is it from  wpb.............
05 yfz houser hiper  elka rpm alba   03 cr125   05 f350 fx4     braaauuuupppp !!!!  ftr +30B #58

Hollywood

I'm down for either place anytime just let me know when!  ;D
'99 4??EX: Laeger +2's, Elka Resi's, Tag bars, AC ProPeg, Sparks X6 exhaust, G-Force axle, Burgard stem/carrier, 250r Hood, Klaw MXR's, ATP Racing engine, LSR, MSR, PEP and the list goes on.

'03 Honda 250EX: Yea it's decked out too!

'03 Yamaha Blaster: Work in pr

Mrs.Nightbreed

QuoteHa, i'm putting my motor together this weekend and then puttin all the new mounts into my frame after that.... i gotta get it PC'd when i get my motor all fit in there and then after PC LETS RIDE! ..... what suspension r u gonna go with if u do it?

I had Elka triple rates without rezzies on the front and was still having problems. So we sent them to Elka to add remote rezzies and compression adjustments. Well, it turns out the shocks were messed up all this time. They were compressing but never coming back up :-/ So thats getting fixed and I ordered a dual rate Elite ZPS adjustable Elka rear. They should be here in 2-3 weeks. I will be ordering Wicked +3+1 A-arms and a W.E.R. Dampner at the end of next week too....  WOO HOO Watch out boys here I come

LostCause

#12
If you ride like you did at Bartow we need to watch out!!!!!  LOL.
For yall that didn't hear She got a 3-1 with a 2nd overall.  She beat a girl that hasn't lost in a long time.  Turning that 265(lol) on a dime.  Way to go.
We have the ability to control our future.

www.SSQSA.net

Thanks to our sponsors: Walsh Racecraft, X-Tream Clean, Ripixx, Goon with Style, Pit Posse, Amsoil, Equalibryum, Crown Wear, Answer, MSR, AXO, Slackercross, UFO, MXRESULTZ

Other Florida sites of interest: www.PinballShark.com