My New FAST Banshee

Started by TurboBanshee_kid, March 21, 2005, 11:14:33 AM

Previous topic - Next topic
Print
Go Down Pages1 2 All
User actions

TurboBanshee_kid

March 21, 2005, 11:14:33 AM
 ;D
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs

TurboBanshee_kid

#1
March 21, 2005, 11:15:17 AM
 ;)
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs

TurboBanshee_kid

#2
March 21, 2005, 11:16:07 AM
 :o
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs

TurboBanshee_kid

#3
March 21, 2005, 11:17:07 AM
 :D
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs

TurboBanshee_kid

#4
March 21, 2005, 11:17:52 AM
 8)
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs

TurboBanshee_kid

#5
March 21, 2005, 11:19:05 AM
 ;)
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs

TurboBanshee_kid

#6
March 21, 2005, 11:20:02 AM
 ::)
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs

TurboBanshee_kid

#7
March 21, 2005, 11:20:52 AM
 :P
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs

rubicon500kid

#8
March 21, 2005, 12:05:28 PM
nice shee are those t-5 or t-6 how dose it run ?
DROP & DESTROY
87 s10 2/3 soon to be bagged
85 honda 110 atc(22" bearclaws & snorkeld)
01 kx 125 (pc pipe,tag bar's,pro racing rear rim,some lil other stuff
I hate it when you microwave something, then you start eating it, and it's cold in the middle...makes me wanna punch a

DS650

#9
March 21, 2005, 12:06:37 PM
Pretty nice....You need to get some shock covers though....That yellow doesent look right with the red and white....
~~~~~~~~~~~~~~~~~
2004 Grizzly 660-Stock
2001 Banshee-Mods  
~~~~~~~~~~~~~~~~~

DS650

#10
March 21, 2005, 12:07:30 PM
Im guessing those are T5's
~~~~~~~~~~~~~~~~~
2004 Grizzly 660-Stock
2001 Banshee-Mods  
~~~~~~~~~~~~~~~~~

MOKAS

#11
March 21, 2005, 02:22:01 PM
looks good but im not too crazy about 2x the repair bills. ;D

-mokas-
MIKEMOKAS

'06 Polaris Sportsman 800 EFI,
2in front
Highlifter clutched
Highlifter reduced

'02 Sportsman 500HO -Traded-
2in front
26in PXT Take-Offs

00 Yamaha Blaster 67.75mm Wiseco Piston, and a couple other things... Gone but not forgotten..

'96 trail boss 250.. Gone and forgotten.

tampaboy813

#12
March 21, 2005, 04:48:07 PM
Quotelooks good but im not too crazy about 2x the repair bills. ;D

-mokas-
+1 looks like a nice bike....

TurboBanshee_kid

#13
March 21, 2005, 05:07:59 PM
toomey T-5'S ;D IT HAS SHAVED HEAD'S AND IT uses 101 octane and 200 compression.
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs

01_DS650

#14
March 21, 2005, 05:19:07 PM
We wnet out today and it runs good buts no match for the DS650
2006 Outlander 800 Green with snorkels and 28in outlaws

TurboBanshee_kid

#15
March 21, 2005, 05:25:15 PM
yeah right the banshee was killing the DS650


AND I DID THE BIGS WHEELIE ON YOUR BIKE TODAY
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs

rubicon500kid

#16
March 21, 2005, 05:55:07 PM
sounds realy cool i like using my friends shee it hase t5 pipes and thats all and thats good for me those shee haul a$$
DROP & DESTROY
87 s10 2/3 soon to be bagged
85 honda 110 atc(22" bearclaws & snorkeld)
01 kx 125 (pc pipe,tag bar's,pro racing rear rim,some lil other stuff
I hate it when you microwave something, then you start eating it, and it's cold in the middle...makes me wanna punch a

Smoknbanshee

#17
March 21, 2005, 06:30:18 PM
pretty nice shee...... ;D ;D
Team FBI (Florida Boy's Inc.)
A$$ Crack Racing
Choke on my Smoke!

Old_School

#18
March 21, 2005, 07:28:38 PM
Quotetoomey T-5'S ;D IT HAS SHAVED HEAD'S AND IT uses 101 octane and 200 compression.

200lbs? How did you come to that? That's awefully high. My buddy has a 05 shee with 20cc domes and it's 150lbs. Did you do a compression check? -Mark
90' LT500R Quadzilla
Breathing fire and crushing cities

92' LT250R Quadracer
Some stuff done. 75+mph (Sold)

"When this baby hits 88 mph, you're gonna see some serious $%#!" - Christopher Lloyd

tampaboy813

#19
March 22, 2005, 03:49:16 AM
Quote200lbs? How did you come to that? That's awefully high. My buddy has a 05 shee with 20cc domes and it's 150lbs. Did you do a compression check? -Mark
he checked it when it was still running.... [smiley=abduct2.gif]

Smoknbanshee

#20
March 22, 2005, 04:17:25 AM
200lbs is tooo much if you ask me....just my thoughts....

there is a fine line between too much and not enough...
Team FBI (Florida Boy's Inc.)
A$$ Crack Racing
Choke on my Smoke!

Old_School

#21
March 22, 2005, 05:53:25 AM
I hear ya on that smokin. I just put a 59cc dome on my zilla and it's at 175lbs. I can stand on the kicker when the piston is at TDC and the pistion will hold me up. lol. Kinda sucks cause now I have to run atleast 104 in it.  -Mark
90' LT500R Quadzilla
Breathing fire and crushing cities

92' LT250R Quadracer
Some stuff done. 75+mph (Sold)

"When this baby hits 88 mph, you're gonna see some serious $%#!" - Christopher Lloyd

Smoknbanshee

#22
March 22, 2005, 07:06:20 AM
the top end charge on a 200lbs compression bike sucks.....i think the yfz's with the high compression piston are actually not as fast as the stock piston, not to mention the problems my friends have had with the high compression pistons...

200lbs compression, is harder on the crank, decreases the top end charge the bike has, but to each his own....i run compression that is middle of the road for a banshee and usually run a TRUE octane rate of 104 to 106....
Team FBI (Florida Boy's Inc.)
A$$ Crack Racing
Choke on my Smoke!

TurboBanshee_kid

#23
March 22, 2005, 07:17:28 AM
I'M NOT SURE THAT IT IS 200lbs i just got it from a guy.

he said it was 200lbs.
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs

Chuck_Norris

#24
March 22, 2005, 07:29:26 AM
Do a compression test on it, hold the throttle wide open when turning it over, then take the number you receive and divide it by 15 for your compression ratio. 200psi is about 13:1

Old_School

#25
March 22, 2005, 07:56:35 AM
I believe stock shees are around 130lbs. So with a shaved head say .010 off or even up to .020 which .020 is alot I'd say your probably around 150 lbs or so. Like you said just make sure you keep putting atleast 101 in it. But I do like the light covers. Pretty funny but yet cool in the same manner.
-Mark
90' LT500R Quadzilla
Breathing fire and crushing cities

92' LT250R Quadracer
Some stuff done. 75+mph (Sold)

"When this baby hits 88 mph, you're gonna see some serious $%#!" - Christopher Lloyd

Vegas

#26
March 22, 2005, 06:26:30 PM
Did you GPS a top speed on that bad boy yet?

Curious to see what she tops out at.


I wanna ride it.

miamiblaster

#27
March 23, 2005, 08:10:23 AM
Hey turbo banshee kid where do you ride I see performance atv sticker on that shee rays shop is very close to me I ride over by crome and 136st
I like my girls like i like my mustangs skinnys in the front and fat in the back

TurboBanshee_kid

#28
March 23, 2005, 08:26:43 AM
pines and 27
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs

leadsled

#29
March 23, 2005, 11:47:02 AM
i used to ride on pines and 27 at the post office but they bulldozed it, if you still ride there and its good we should meet up some time i got a banshee also.let me know whats up

TurboBanshee_kid

#30
March 24, 2005, 09:11:27 PM
bump yeah it is a good place to ride.
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs

TurboBanshee_kid

#31
March 26, 2005, 06:20:18 PM
bump
New to the Engine 421cc Cheetah Cubs that are fully race ported, Hot Rods 4mm Stroker Crank, Ricky Stator fly wheel and 200watt stator also timing plate is at +5, NOSS Head with 17cc domes, V force 3 reeds and 36mm MIKUNI Flat Slide carbs
Print
Go Up Pages1 2 All
User actions
Other Florida sites of interest: www.PinballShark.com