Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - chubbyEXboy300

#1
i know he has lights installed and he had 1 too many on each post (too many for code) so they have to take them down. im positive there is going to be night riding for sure!!
#2
i went there and talked to the owner last week. He is a really cool guy. i think his name is john. He gave me and my buddy a grand tour. We went on top of that building and he showed us the track from start to finish. '

Personay i think it is a more quad friendly track because the dirtbikes will be having to slow down. Its really slick track. He has some really really big burms and i mean huge. They are having a 300ft sand drag and a mud bog.

Its more family oriented and is not going to have as much of a race scene as seminole.]

All in all i think it is going to be a kick a$$ track. it opens up june 3rd and i hope to see lots of people out there!!!
#3
Where to Ride? / County Line MX
May 24, 2006, 08:31:57 PM
THis is a new track opening up on Krome\ June 3. That is a saturday. County line will have a race track for quads and dirt bikes. They will also have a pee-wee track for the young guns, they have a 300ft sand drag, and they have a mud bog for the trucks and jeeps. It is a lighted track so it will be opened at night.

Me and my buddy saw it and drove in on our way home from seminole, we talked to the owner and he gave us the grand tour. He said that they will have running water for the pit area and rnning bathrooms and connsessions. esonally i think the track is a more atv friendly track because it is hard packed not soft and loose like seminole. The track does have a bridge on it and you go over and under the bridge.
#4
Tech Corner / Re: 1990 RM80 Pistons
April 05, 2006, 07:25:28 PM
if any of u tech guys need some specs to figure my problem out i have the Service manual so just reply to the thread. Thanx
#5
Tech Corner / 1990 RM80 Pistons
April 05, 2006, 07:23:21 PM
I need a .20+ piston for a 1990 Rm 80 that has been .20+ bored over. I think i should buy the .25+mm piston (wiseco) but im just not sure. Another site said .50+mm piston. I really need some help with this before i buy and install a new piston.
#6
Product and Services Reviews / Re: HMF Engineering
January 19, 2006, 07:16:55 PM
i have the m on my 300ex and it hauls so much  a$$
#7
Product and Services Reviews / Re: HMF
January 19, 2006, 07:13:33 PM
i have  an hmf slip on on my 300ex. it is so freaking nice, loud but nice. all my niehbors hate me but thats cuz im dead sexy lol
#8
Tech Corner / [glow=red,2,300]Clutch problems[/glow]
January 19, 2006, 07:06:23 PM
i got new plates and springs for my 300ex over rockymountain and i was wondering if it was hard to put them in and if anyone had any advice for me for when i put it in. thanx
#9
Tech Corner / 300ex 400ex sprockets
December 25, 2005, 09:21:57 PM
does the 300ex and 400ex front sprockets match up on each bike. because my frind wants my 14 tooth sprocket and he is going to give me his 15 tooth. i just want to know if it is possible for me to trade him for the sprockets.
#10
Tech Corner / Oil bolt leaks
December 14, 2005, 06:15:02 PM
i have a 300ex and the owner before me stripped and cracked part of the oil drain bolt and hole and they drilled and re tapped it but it kinda leaks out of the crack. idk what i should do. i think i should re drill and re tap it and fill the crack in with jb weld. any suggestions?????????????
#11
Open Discussion / msr handle bars on 300ex
October 12, 2005, 09:35:24 PM
i have a 05' 300ex. I had the stock handle bars on it and bought msr dirt bike handle bars but i was wundering it it takes away from the performance or does it just depend on the feel of the bike????????????????????
#12
Tech Corner / 05 300ex 2000
October 09, 2005, 11:54:42 PM
i just bought a 300ex 2005 for 2000$. the person who had it before me stripped the oil drain bolt and it leaks like just a teanny tinny bite every night. It has msr handle bars but the clutch lever is not haard to pull in but it is harder than my buddies 300ex clutch lever

would like some comments or suggestions
#13
Tech Corner / Re: psi in holeshots
October 09, 2005, 11:49:14 PM
i think 1,000,000psi would be suficient for the type of tireyou are using there sonny. we aregoing to ter that mx trak up so dang bad. we are going to ave the badest 300ex's in homestead.
#14
Racing Scene / Re: Public Track in south florida Freeee
October 09, 2005, 10:52:19 PM
in homestead, on a street called mcmen its rely nice my buddies and i hang out there alot and have alot of fun. Its huge with some nice jumps and whoops. Whenit rains the water sitts for a long a$$ time and it doesent go away but it gettr really muddy and it getts alot funner.

i got a 300exandalot of lids on ktm and yfz and raptors tear up the course's
#15
Where to Ride? / free 10 acre track in south florida
October 09, 2005, 10:10:45 PM
its a 10 acre field people where gong to build houses on and wellthey havent. its 2 tracks with desent jumps and whoops. We get going pretty fast some cops own the track but they dont complain atall!!!!
#16
Racing Scene / Public Track in south florida Freeee
October 09, 2005, 10:02:10 PM
its two really small tracks. Some nice jumps and you canget going pretty fast. If any one comes we ca make as many tracks as we want. They were going to make houses on it but never did , it has been a giant10 acre field with jumps whoops and allkinds of fun stuff.
#17
Open Discussion / Re: I need a good tire
October 09, 2005, 09:46:50 PM
yah thats what i was thinking especially on a 30ex
the sur tracks where nice but they were not to good in the dirt like my buddies hole shots are
#18
Group Rides & Events / STeal bridge
October 09, 2005, 09:38:27 PM
me and vampire350 kid orsumtinlike that r ging to steal bridge monday come on down its a blast
#19
Open Discussion / I need a good tire
October 09, 2005, 09:25:22 PM
i have 22" sur traks and 22" holeshots but they r worn down . im looking for a good dirt tire but i still dont want to get stuck in the mudd.
Any suggestions?????????????
#20
Open Discussion / Re: New member chubbyEXboy300
October 09, 2005, 09:20:23 PM
yah it worked finally ;D
Other Florida sites of interest: www.PinballShark.com