Can anybody tell me where the wires go from the switch to the quad? I bought this thing used with no instructions but couldn't pass up the deal.
Maybe this will help:
http://www.bluetraxx.com/killswitch_install_new.htm
Take one wire from the kill switch and put an eyelet on it, ground it to the coil with one of the bolts that hold the coil to the frame. Take the positive wire off of the coil.(there will be only one single small gauge wire that will unplug from the coil) Eaither cut the connector off of the wire and install a new connector using both wires or install a piggyback connector on the coil, and hook both wires to it.
Give me a call if you have any questions.
Thanks, Mike
407-880-3171