having a problem with the fronts . can't get the inner bead to seat completely . tire says only inflate to 15 psi max when seating bead . have done that and used WD-40 to help lubricate the tire and wheel so the tire would seat . still not seating completely . ....... any suggestions .
try airing them up and bouncing them on the ground like a basket ball
Yeah what he said above and...
It works best if you remove the valve stem core
then have a powerful enough compressor to pump
MORE than 15 psi. I know it says not to but you
have to do a few to see it rarely works with that
little psi.
Removing the core makes sure that the air goes IN
fast and comes OUT fast as well.
Good Luck,
Dano
get fat girl set her on tire, problem solved. :ThumbsUp.gif
thanks guys , have tried the basketball bouncy thing , no luck . will try removing the core and using the compressor idea . as far as the fat girl idea . can you have one come over later . lol
Quote from: nATiVcracker on September 26, 2005, 07:17:19 PM
thanks guys , have tried the basketball bouncy thing , no luck . will try removing the core and using the compressor idea . as far as the fat girl idea . can you have one come over later . lol
When I say more than 15psi I mean like
25 to 30psi. Did you try
that. Thats how much it took to seat my front hipers before I started
doing it the way I descibed above.
Again, Good Luck and becareful too,
Dano
hey john ! bring them hypers over here ill fix them for you! ill put like 70 lbs in them that will fix them............ ca...........booooommmmmmmmmm.................................. :'(
Hi-per has had a recall on all the 9-inch rims that I saw when i wen't to the site, check it out... ;D
Quote from: Yamaha72 on September 27, 2005, 09:24:00 AM
Hi-per has had a recall on all the 9-inch rims that I saw when i wen't to the site, check it out... ;D
He said he is having problem with the "fronts", which would be 10-inch wheels.
I know, just trying to help out............... isn't this is what this website is for...
Yes it is.
But he has a specific problem he's dealing with, not just a problem
in general with hiper wheels. So going to the website and checking
out problems for 9-inch wheels is a waste of his time.
I didn't mean to come off wrong. Sorry if you took it that way.
TAKE EM TO A SHOP
Were you able to get your tires mounted?
hey thanks for the responses . tires mount easy . i just couldnt get the fronts to seat all the way on the inner ring . used wd40 a little better than before . will try using 25psi to 30 psi . to complete the seat . i have got a few hours on them like they are know without problems . but i'd feel better if they were totally seated . trust me they aint going no where, tire just isn't as wide as it could be . but then again i'm pretty nit picky.
Kewl beans :Clap.gif