Text only | Text with Images

ATV Florida Forum

General => Open Discussion => Topic started by: Eworm on May 06, 2005, 08:29:16 AM

Title: Question about Raptor and spacing
Post by: Eworm on May 06, 2005, 08:29:16 AM
I was wondering if one you guys can help me here. I bought an ext axle, a arms and shocks for my raptor. My question is if my arms are plus 2 can I go wider in the back? For example:
 
FRONT:
Plus 2: 1 and 1 on each side
 
BACK
Plus 3: 1.5 and 1.5 on each side
 
If it helps any, I have the gforce and ASR pro comps
 
Thanks in advance
 
Worm
Title: Re: Question about Raptor and spacing
Post by: lawn_man mx on May 06, 2005, 08:41:17 AM
you should go wider on the rear  otherwise the quad will feel weird  while high speed  turning
Title: Re: Question about Raptor and spacing
Post by: Eworm on May 06, 2005, 09:05:49 AM
Quoteyou should go wider on the rear  otherwise the quad will feel weird  while high speed  turning

Are you sure about this? Just want to make sure.
Title: Re: Question about Raptor and spacing
Post by: ish on May 06, 2005, 03:14:18 PM
hey worm isn't manny's raptor wider in the front than in the back?
Title: Re: Question about Raptor and spacing
Post by: arod on May 07, 2005, 03:07:03 PM
 just go by total width. gnc racing limit is 50 inches from rim/tire edge to edge. anything wider than stock is more stable. especially RAPTORS which are very narrow stock. trail riding becomes more challenging when wider..
Title: Re: Question about Raptor and spacing
Post by: Exmx54 on May 08, 2005, 04:56:56 PM
DONT get wheel spacers, just wait and save up for A-arms, suspension and axle.
Text only | Text with Images