Here are some pix from my project yesterday- I installed a Warn 3.0ci winch on my Eiger. It wasn't very difficult, I just had to think it through before starting.
[attachment deleted by admin]
The Eiger has a gasketed box at the rear of the bike. I put the contactor in there.
[attachment deleted by admin]
looks good, just hope you never need to use it ;) lol
I cut a hole in the back of the box with a hole saw, ran the cables and then caulked it as best I could.
I mounted the hand-held remote receptacle on the plastic shroud for the speedo.
[attachment deleted by admin]
I mounted the handlebar switch on the left so I can operate the throttle and the winch at the same time if neccessary. This is per the Warn instructions.
Now that I am finished, it is time for
:E and :drink.gif :drink.gif :drink.gif !!
[attachment deleted by admin]
Quote from: Flsportsman05 on August 30, 2005, 03:37:46 PM
looks good, just hope you never need to use it ;) lol
Thanks! I can't wait to try it out- on someone ELSE'S quad!!!!
I know who you are referring to... ;D Of course, Aaron and/or Kat (probably both) (on their sport quads) on their first ride out with the utes. ;) :-[ Oh well, I guess you will learn whether the winch works or not. Keep on pullin'
and thanks for the vote of confidence GSPKurt
Quote from: Kat1333 on August 30, 2005, 04:16:44 PM
I know who you are referring to... ;D Of course, Aaron and/or Kat (probably both) (on their sport quads) on their first ride out with the utes. ;) :-[ Oh well, I guess you will learn whether the winch works or not. Keep on pullin'
and thanks for the vote of confidence GSPKurt
Now did I say anything about anyone in particular???
Nooooooooooooo, I didn't!
Looks great it's always fun pulling others out of the mess they get into. Nice to have when your in a mess also.
Kurt, Looks great, words of wisdom get some of that liquid electrical stuff and coat the connectors on the inside of your box with it. It will get moisture in the box and connectors to the bolts need to be protected so it will keep working. I fried one due to it rust and corroaded connectors and it is costly.
Jim
I'll give ya a reason to need it on the next group ride at eureka.
good job. looks good.
Looks good!
Quote from: Seabeejim on August 30, 2005, 10:57:27 PM
Kurt, Looks great, words of wisdom get some of that liquid electrical stuff and coat the connectors on the inside of your box with it. It will get moisture in the box and connectors to the bolts need to be protected so it will keep working. I fried one due to it rust and corroaded connectors and it is costly.
Jim
Jim-
You mean the main power lugs that the heavy cables are on? I put the rubber boots on the terminals, thats not enough? I'll get some liquid electrical tape at Wally World today. Yes it is costly :(- a new contactor is $100.00! :( :'( Could I smear some silicone grease on the lugs? I think it would be a bi*ch to get the nuts off the posts if I use the liquid elect. tape.
Quote from: jwscroll on August 31, 2005, 07:35:44 AM
I'll give ya a reason to need it on the next group ride at eureka.
Oh, Goody!!!! I get to use the new toy! b:r