I've just got a PEP ZPS rear shock for my 87 R. I can't seem to get the top of the shock into the mount. It seems it is about 1/16 of an inch too wide...just enough it won't go in. Any suggestions?
Thanks!
Mike
Didn't you just have that frame powder coated? If so it might be the extra thickness from the powder...I know I had that problem on some things. Might just need to grind the powder off.
Mike , sometimes from tightning the bolt down over and over it will pull the tabs together. Try taking a philips screw driver or something and just slighty bending the tabs open alittle bit. ;)
I agree with hollywood. If you just had it powder coated depending on how thick it was put on that will happen.