Well, to start of, I recently picked up an 06' YFZ 450 that seems to be a bit of a project. The previous owner hacked up the wiring harness in an attempt to do weight reduction and add a kick start. The quad has no key switch, no head lights, no battery, etc. Basically whatever could be gutted was. I need some help getting this thing wired the way it should be so it will run. The quad is not currently running due to the harness issue. This will most likely need to be looked at in person as pics don't really help. Anyone near Ocala that could check out the yfz and wire it the way it should be? Im not good with wiring like this. This harness looks like a bunch of wires just hanging out in the open by the regulator/rectifier. Thanks in advance.
Here ya go.
http://cgi.ebay.com/ebaymotors/06-YFZ450-YFZ-450-wiring-harness-wire-loom-26_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem350149883357QQitemZ350149883357QQptZMotorsQ5fATVQ5fPartsQ5fAccessories
http://cgi.ebay.com/ebaymotors/Yamaha-YFZ450-YFZ-450-Complete-Electrical-Wire-Harness_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c66Q3a2Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318Q7c301Q3a1Q7c293Q3a1Q7c294Q3a50QQ_trksidZp3286Q2ec0Q2em14QQhashZitem220340618861QQitemZ220340618861QQptZMotorsQ5fATVQ5fPartsQ5fAccessories
pm sent