Text only | Text with Images

ATV Florida Forum

General => Tech Corner => Topic started by: fastang on November 20, 2008, 05:19:22 PM

Title: 96 Warrior Carb Question
Post by: fastang on November 20, 2008, 05:19:22 PM
I just put a used carb on my 1996 Yamaha Warrior. It will only idle when the idle screw is all the way. Also it sputters and blows a little black smoke until I have it about half throttle.

Any suggestions?

Thanks!
Title: Re: 96 Warrior Carb Question
Post by: fastang on November 20, 2008, 05:21:00 PM
Also, I have a rebuild kit for it.  If there is anyone near Eglin AFB that would rebuild it for cheap, PM me.
Title: Re: 96 Warrior Carb Question
Post by: TRX450R_Racer on November 20, 2008, 09:37:03 PM
Quote from: fastang on November 20, 2008, 05:21:00 PM
Also, I have a rebuild kit for it.  If there is anyone near Eglin AFB that would rebuild it for cheap, PM me.

If you were near West Palm Beach I would do it.
Title: Re: 96 Warrior Carb Question
Post by: crom A zone on November 20, 2008, 09:49:46 PM
sounds like the float is not workin    at low revs or the diphrame  is broken
Title: Re: 96 Warrior Carb Question
Post by: scrimmy on November 21, 2008, 06:11:56 PM
send it to me i will rebuild it for nothing.
Title: Re: 96 Warrior Carb Question
Post by: fastang on November 22, 2008, 02:16:30 PM
Thanks for the offer, but I bought the book and went ahead and did it myself.  She runs like a champ now.
Text only | Text with Images