I have a z400 and id like to cut my fenders. What should i use to cut them and about where should i cut them. Pictures??
Thanks!
use some blue painters tape to make the outline so you can change it several times before you cut . i used a dremal tool with a cut off wheel to do mine
i had some pics but they disapeared >:( if you want you can call me.
i used a jig saw and a file,and some masking tape
Quotei used a jig saw and a file,and some masking tape
that will work too
I used a razor knife with the hook blades to do mine then just sanded the edges. I had to change blades about half way through each side and musle it through but other than that it was pretty simple. Like was said above just tape it off first to figure out where you want the line.
(http://www.atvflorida.com/files/attachments/400_front_plastic_1.JPG)