|
Title: dynojet kit Post by: CamoPrairie on March 23, 2005, 06:47:10 PM went to install a kit today and when I turned gas on I'm gettin fuel running back into my air box - where did I go wrong? any help would be appreciated. Thanks
Title: Re: dynojet kit Post by: 2fast4u on March 24, 2005, 06:34:32 PM well it sounds like 2 things. float is stuck and the drain is clogged or kinked. try tapping on the carb bowl to loosen the float. you might open it and look to see if there is something under the float needle like a piece of dirt. But it should run out of the vent tubes before you see it in the airbox. Tapping the carb will jar the float and maybe stop the leak but you need airvents to run properly
Title: Re: dynojet kit Post by: CamoPrairie on March 24, 2005, 08:07:55 PM 2fast u da man - drain line was the problem. I owe you a beer or whatever it is that you drink. Runs better than new now. Thanks again.
Title: Re: dynojet kit Post by: 4xPlay on March 27, 2005, 03:22:43 PM keep up the good work(advice) 2fast4u!!!!.....this is a great place for tech tips!!!!
|