so far out there, i've gone through a motor, transmission, and i think thats all, well today it became a little more, just crossed over the bridge to help someone who was stuck, welllllllll, just past the frist bridge this happened
(http://i36.photobucket.com/albums/e50/snowmanzz13/PICT1766.jpg)
(http://i36.photobucket.com/albums/e50/snowmanzz13/PICT1767.jpg)
(http://i36.photobucket.com/albums/e50/snowmanzz13/PICT1768.jpg)
(http://i36.photobucket.com/albums/e50/snowmanzz13/PICT1769.jpg)
(http://i36.photobucket.com/albums/e50/snowmanzz13/PICT1770.jpg)
Quote from: JohnF on September 16, 2007, 09:56:35 PM
maybe, just maybe....its not the holeylands, its that its a poolaris
Nah ,
Cant blame the area or the bike on this one.
Snowmanzz13 what the heck did you do? :dunno.gif
Trade it in for a Honda and you will be ok
Quote from: rdm225 on September 16, 2007, 10:34:59 PM
Trade it in for a Honda and you will be ok
ya..you'll be ok..BUT YOUR VALVES WONT! haha
Quote from: JohnF on September 16, 2007, 10:42:49 PM
why do you keep saying there is a problem with honda valves?
They get loose, shoot up at 600 mph and go through the gas tank, impaling the rider and then the quad explodes in a fiery inferno.
i'm just kidding..because everyone says it..its a joke for me
Quote from: quadracer1992 on September 16, 2007, 10:44:23 PM
Quote from: JohnF on September 16, 2007, 10:42:49 PM
why do you keep saying there is a problem with honda valves?
They get loose, shoot up at 600 mph and go through the gas tank, impaling the rider and then the quad explodes in a fiery inferno.
Thats hot...
should have bought a Honda. i had that happen to a kawasaki while i was turning for crying out loud. just turning!!! at round 20mph!! then we sold it and bought a Honda and have not had one problem with any bike since then.
well, were basically regretting this buy, every time we take it out something happens to this thing, i was basically turnig coming off the levee to help these girls who were stuck and as i was turning to shot down the levee, boom the front left wanted to keep going straight, deffinatly intresting to ride it like that, just basically destroyed the cv joint and the ball joint that holds the a arm to the strut, and i dunno about that whole honda thing, we got there and i was on my banshee, when i went through a little hole that was kinda dried up and i found pieces of a honda :o in the bottom of that hole
do you always pressure wash them in the middle of the road?
Quote from: Fox17 on September 17, 2007, 01:38:52 PM
do you always pressure wash them in the middle of the road?
:D I was thinking the samething. But then again, no sense in doing it in your own driveway where all that mud will go. Let the county deal with it
Quote from: REBEL SS/T on September 17, 2007, 02:22:21 PM
Quote from: Fox17 on September 17, 2007, 01:38:52 PM
do you always pressure wash them in the middle of the road?
:D I was thinking the samething. But then again, no sense in doing it in your own driveway where all that mud will go. Let the county deal with it
way to go guys
Quote from: Joedirt on September 17, 2007, 02:24:01 PM
Quote from: REBEL SS/T on September 17, 2007, 02:22:21 PM
Quote from: Fox17 on September 17, 2007, 01:38:52 PM
do you always pressure wash them in the middle of the road?
:D I was thinking the samething. But then again, no sense in doing it in your own driveway where all that mud will go. Let the county deal with it
way to go guys
what do you mean by guy
s? i was asking a question. we wash ours in our back yard. we built a lil deck that we park them on then they go into the shed without driving on the dirty ground.
wash them in your lawn, that black dirt is good for the grass.
It's not the holeyands. It's your Polaris. You must be in denile. Poor thing.
Quote from: Fox17 on September 17, 2007, 02:33:37 PM
Quote from: Joedirt on September 17, 2007, 02:24:01 PM
Quote from: REBEL SS/T on September 17, 2007, 02:22:21 PM
Quote from: Fox17 on September 17, 2007, 01:38:52 PM
do you always pressure wash them in the middle of the road?
:D I was thinking the samething. But then again, no sense in doing it in your own driveway where all that mud will go. Let the county deal with it
way to go guys
what do you mean by guys? i was asking a question. we wash ours in our back yard. we built a lil deck that we park them on then they go into the shed without driving on the dirty ground.
no need to get Sassy with me Buckaroo....
I love holey lands, it loves my bike too...
it always comes back cleaner than it left my house for some reason too :)
(water wheelies in the lake, I go rack high ;) )
Quote from: snowmanzz13 on September 17, 2007, 08:25:06 AM
well, were basically regretting this buy, every time we take it out something happens to this thing, i was basically turnig coming off the levee to help these girls who were stuck and as i was turning to shot down the levee, boom the front left wanted to keep going straight, deffinatly intresting to ride it like that, just basically destroyed the cv joint and the ball joint that holds the a arm to the strut, and i dunno about that whole honda thing, we got there and i was on my banshee, when i went through a little hole that was kinda dried up and i found pieces of a honda :o in the bottom of that hole
So...your quad basically thingy blocked you.
I'm just kidding man, good luck with your next buy.
no i don't usually wash them in the street, lol my neighbor was out there with us and had a big trailer with one quad on it that we pushed this polaris on and he just pulled in onto the road and we unloaded it on the road and just washed it there and put the front end on a rolling jack and drove/directed it into the garage, hopefully we can get this thing together, and maybe it's just a junk bike but when it runs, it runs strong right until something breaks
like painting "male" on the mailbox,,,,,that aint right.
Id@
hey snowman kid it might help if u do work on the bike when u are done ridding and check things like ball joints and tie rod ends they break very is on 4wd or any off road vechile
thanks for that, we stocked up, now we have 3 ball joints, and a front an rear cv layin around just incase this happens again
if u were smart you wont let it happen agian. i rode hard last friday night so i had some time today i jacked my bike up and what do i find a broken tie rod end so now i replace it and i wont be left stranded anymore. comman seance it goes a long way but glad to see u are learning u think that poolaris can handle the big boy trails?
lol i dont know about this polaris anymore, and i don't think it can even handle the bunny trails, let alone the big boy trails
Quote from: snowmanzz13 on September 17, 2007, 08:25:06 AM
i was basically turnig coming off the levee to help these girls who were stuck and as i was turning to shot down the levee
So were the chicks hot?
DEFINATLY!!
You might want to buy a HONDA next time... They'll never leave you stranded.
maybe a old honda. i wouldnt hit a hog in the a$$ with that push rod motor. the over head cam motor was the sh!t. then honda came out with that push rod sh!t. owned a honda and then sold it and got 2 sportsmen 500's. the polaris never came me a lick of problems. i think its all how you take care of the bike and how you treat it.