how do i wire in the kill teather switch to the 06 yfz? any pictures would help
I don't know how to wire it, but I know Baldwin Motorsports makes a plug and play harness. You don't have to cut any wires.
What brand switch is it?
basically, you wire it to your coil, you plug into the inlet of your coil on the longer wire if it's the motion pro one, an the other one you put to a good ground. so when you pull the teather it basically grounds the power so the coil is grounded, and they way i have mine set up completly opposite the way i stated where my teather actually completes the power to the coil and when it's pulled it pulls the power from the coil
i hope this makes sense