Text only | Text with Images

ATV Florida Forum

General => Tech Corner => Topic started by: HOWIE on March 08, 2007, 02:14:31 AM

Title: Stroker Motor Issues
Post by: HOWIE on March 08, 2007, 02:14:31 AM
Firend of mine has a Banshee. It's stroked +5 and bored. It keeps blowing rods on the same side. It has a 2 in 1 carb so it can't be running rich or lean to either side. Any advise as to what this could be? Thanks
Title: Re: Stroker Motor Issues
Post by: blindkaeta on March 08, 2007, 02:27:38 AM
Could the crank be out of balance?
Title: Re: Stroker Motor Issues
Post by: Mars on March 08, 2007, 02:58:55 AM
Bending or breaking rods, smoking the bearings, big end or little end?
Title: Re: Stroker Motor Issues
Post by: Smoknbanshee on March 13, 2007, 10:28:03 PM
unbalance crank, piston sticking, piston slapping and hanging up, etc.  might want to check to make sure bore size and piston size are matched up correctly.  have the crank welded and trued and balanced.  if cylinders gouged, clean them up, match the pistons and roll on.
Title: Re: Stroker Motor Issues
Post by: cutngrs on March 13, 2007, 10:46:37 PM
more info is needed to help you out it could be sucking air at the crank seal or a base gaskit  call me and i can help you out  1352 427 2604 troy
Title: Re: Stroker Motor Issues
Post by: Smoknbanshee on March 14, 2007, 05:10:28 PM
cutngrs is the banshee man.  I would give him a call.
Text only | Text with Images