Well goforitgraphics.com sent me the wrong graphics, they sent them for stock z400 plastics, and it didnt match up right with my lakers. SO no graphics yet :'(
(http://i6.photobucket.com/albums/y235/klutchbuster350/northcarolina061.jpg)
(http://i6.photobucket.com/albums/y235/klutchbuster350/northcarolina062.jpg)
(http://i6.photobucket.com/albums/y235/klutchbuster350/northcarolina063.jpg)
(http://i6.photobucket.com/albums/y235/klutchbuster350/northcarolina064.jpg)
Swinger bearings are all in good now, My dad grinded down one side of the swing arm a few weeks ago trying to install a pair of all balls bearings which wouldnt fit,we then found out we had to use lonestar bearings. SO with that the lonestar bearing had alot of play. We had to really think like cubans on this one and used a cut up coke can as a spacer ::)
That thing looks good without the graphics. Keep it clean!
your bike is soo nice.....what kind of elka's are those?
Quote from: Eric5555 on January 05, 2007, 06:38:32 PM
your bike is soo nice.....what kind of elka's are those?
Quadrate with preload and comp. adjustjent.
Thanks, It looks good without the graphics, but Man I like them graphics >:D
When we held them up against the bike they looked really good, just need to get the right ones now! and put my rear number plates on ???
Badass bike right there.After I get my front end done on my shee Im going to save up for some Hypers.Sick ass bike my favorite z
are those the sport and comp series??
Make sure the coke can thing holds up to real riding, just incase it takes any other parts down with it when it fails. What part would you have to but to replace what you grinded?
Quote from: Toomey on January 05, 2007, 07:05:16 PM
Make sure the coke can thing holds up to real riding, just incase it takes any other parts down with it when it fails. What part would you have to but to replace what you grinded?
a WHOLE new swing arm >:(
So im prayin the coke can works.
Thanks for the compliments guys, Just got off the phonr with goforitgraphics, now they tell us they dont make graphics for laker plastics, even after my dad specified we wanted them for lakers, So were gonna have them send us yfz laker graphics and just modify them.
if anything, you saved weight by grinding done your sturdy metal and putting in light weight tin material, lol sick bike
Sweet looks good with the hipers 8)
nice looking ride Jesse. i might see you out there tomorrow.
Looks good! You said santa got them hipers for 650. shipped? where or how?
NICE BIKE!!!!!!!
ya where did you buy your hipers?
Quote from: Eric5555 on January 05, 2007, 10:40:52 PM
ya where did you buy your hipers?
Santa brought them silly ;)
I love the black on black hipers...
Quote from: jmiller450 on January 05, 2007, 09:47:19 PM
Looks good! You said santa got them hipers for 650. shipped? where or how?
640 shipped ;)
My dad found a shop on ebay, he called them up to verify that they were actual dual bead lock carbon fiber hiper rims, and sure enough they were. The guy we called said he is a huge dealer of those rims, and he can cut good deals. Ill look in my warranty paper in a sec to tell you the site.
It looks sick with the Beedlocks.
Looks Good!
Tires & Wheels makes it look alot better~
looks awsome!!! :Clap.gif
Where did you get those tires?
Quote from: strtrcr06 on January 08, 2007, 03:23:10 AM
Where did you get those tires?
Quote from: klutchbuster400 on January 06, 2007, 12:18:59 AM
Quote from: jmiller450 on January 05, 2007, 09:47:19 PM
Looks good! You said santa got them hipers for 650. shipped? where or how?
640 shipped ;)
My dad found a shop on ebay, he called them up to verify that they were actual dual bead lock carbon fiber hiper rims, and sure enough they were. The guy we called said he is a huge dealer of those rims, and he can cut good deals. Ill look in my warranty paper in a sec to tell you the site.
;)
what is the website that you got your beadlocks from?
Quote from: klutchbuster400 on January 08, 2007, 03:39:28 AM
Quote from: strtrcr06 on January 08, 2007, 03:23:10 AM
Where did you get those tires?
Quote from: klutchbuster400 on January 06, 2007, 12:18:59 AM
Quote from: jmiller450 on January 05, 2007, 09:47:19 PM
Looks good! You said santa got them hipers for 650. shipped? where or how?
640 shipped ;)
My dad found a shop on ebay, he called them up to verify that they were actual dual bead lock carbon fiber hiper rims, and sure enough they were. The guy we called said he is a huge dealer of those rims, and he can cut good deals. Ill look in my warranty paper in a sec to tell you the site.
;)
It hepls to read. :-\
For the third time, and second time you asking me eric lol,
THEY CAME FROM EBAY, I DONT KNOW WHAT EXACT COMPANY!!!!!
It doesnt say it on the warranty paper, and Im pretty sure the box they came in is sitting under about 3 bags of cut grass, a barbeque grill, and a christmas tree at the local dump.
Just look on ebay and who ever sells them cheapest brand new is the guy my dad bought them from.
here is the link to the seller on ebay where i got them shipped fpr 640.00
http://stores.ebay.com/Highlands-Powersports
hth, gery
Quote from: gery350 on January 08, 2007, 02:01:39 PM
here is the link to the seller on ebay where i got them shipped fpr 640.00
http://stores.ebay.com/Highlands-Powersports
hth, gery
same guy i got mines from he has the best deals on ebay. ive got to get the fronts now for the new bike.
Quote from: gery350 on January 08, 2007, 02:01:39 PM
here is the link to the seller on ebay where i got them shipped fpr 640.00
http://stores.ebay.com/Highlands-Powersports
hth, gery
ok thanks
nice bike dude. hey let's get together on a sat and hit up seminole after the ftr races. also the 4 race series starts pretty soon, gotta get in shape.
Quote from: arod on January 09, 2007, 01:27:07 AM
nice bike dude. hey let's get together on a sat and hit up seminole after the ftr races. also the 4 race series starts pretty soon, gotta get in shape.
I heard about that 4 race series thing, WHen does it start?
I wanna get some more seat time in before I race it, this past saturday was the first time I've been to seminole on that bike, and the first time back riding in over a month.
Thanks man, I'd love to get a ride going.
Arod are you doing the FTR MX race on the 28th?
no way. ftr membership $$
race fee $$
entrance fee $$
transponder fee$$
gas & food $$
-------------------
MONEYLESS.