what filter should i get for my 450r
also should i run a open air box if so what filter should i run with it
bump
I use the Sparks billet ring with a UNI filter. The UNI by itself tends to pop off because of the slight taper on the end of the cage. The sparks filters have a track record for coming a prt at the seem. I had 2 of them do that and have read a lot of poasts about them coming a apart. The Sparks billet ring locks the UNI in there very tight. I haven't seen the Twin Air set up or the Pro Design. I wouldn't suggest an open air box. I would either get a K&N or EHS lid.
so should i jsut buy a hrc lid and run it like that ?
I used to have the HRC lid. I didn't like how dirty my air box got. The HRC lid will be fine. I would run an outerwear around the filter if you use the open lid. An HRC lid would be better than an open box because it protects the filter from water.
k and n filter all the way. we have them on a 300ex and a yfz. they are awesome.
i have a kn with a outwears and the o.w. stops alot of dirt. i havent had to clean my filter once, still looks new. its been on there since may. but i just clean the o.w. every couple weeks.
I run a K & N High Flow air filter. They say it ups the flow to 881cfm from 548cfm.
I like it, and I run the HRC box with it.
The problem with the HRC box is that it has that gap that allows dirt to enter the box.
So I have to clean and oil the filter after each ride.
It can be high maintenance.
Quote from: UncleRico on August 17, 2006, 12:19:49 PM
I run a K & N High Flow air filter. They say it ups the flow to 881cfm from 548cfm.
I like it, and I run the HRC box with it.
The problem with the HRC box is that it has that gap that allows dirt to enter the box.
So I have to clean and oil the filter after each ride.
It can be high maintenance.
lazy lazy lazy. you should clean it every time anyway. the bike deserves it.