|
Title: blaster runs great after its warmed up Post by: cr1 on June 28, 2006, 10:09:24 PM got a blaster that idles good and is good almost to mid throttle. at full throttle it acts like its starving for gas.once it is warmed up it runs perfect.i have cleaned carb checked all fuel supply even checked reed valves everything good , anyone have similar problems ??
Title: Re: blaster runs great after its warmed up Post by: 53yfz450 on June 28, 2006, 10:44:46 PM isnt that how it normally goes. you have to let the bike warm up. :-\ i think you have nothing to worry about just let it idle for a little before you ride it.
Title: Re: blaster runs great after its warmed up Post by: Hondarider22 on June 28, 2006, 10:46:49 PM its worse with 2 strokes....with my cr 85 i would have to let is idle up to 2 minutes before running it full throttle ;)
Title: Re: blaster runs great after its warmed up Post by: Chuck_Norris on June 28, 2006, 10:59:17 PM got a blaster that idles good and is good almost to mid throttle. at full throttle it acts like its starving for gas.once it is warmed up it runs perfect.i have cleaned carb checked all fuel supply even checked reed valves everything good , anyone have similar problems ?? make sure your jetting is correct for what mods apply. Title: Re: blaster runs great after its warmed up Post by: Alba450 on June 29, 2006, 03:13:04 AM its worse with 2 strokes....with my cr 85 i would have to let is idle up to 2 minutes before running it full throttle ;) I let my YFZ idle for 2 minutes and still isn't fully warmed up.Let it set for atleast 3 MIN ;)(Idle+small revs) Title: Re: blaster runs great after its warmed up Post by: snowmanzz13 on July 06, 2006, 07:50:10 PM i had a problem where it starved like that, and it was the breather tube on the top of the gas cap, it was kinked, and as soon as unkinked it, it ran fine
|