ATV Florida Forum

been waiting a while to get off my dads raptor 350 finally got a quad i can call my own :D
(http://i71.photobucket.com/albums/i128/fatalpoopy/b7da306e.jpg)
(http://i71.photobucket.com/albums/i128/fatalpoopy/1096850d.jpg)
(http://i71.photobucket.com/albums/i128/fatalpoopy/91108e95.jpg)

would you happen to be tom roggers brother?

nice quad

ya i sure am...thanks

is that the 06?
lucky.....
wanna race :)

Congrats Rob!! Looks sweet!! Better get it broke in so you can be at Dade this sat. Just watch out for the Cops they may think that you stole it! LOL

so i herd u were gona get a ltr450 but u got this instead, why?

thanks eric my dad is still doesn't want me to race but ill give it some time he says i can practice but whatever....and ya i was going to get the lt-r450 but i have to finance the thing on my own and i dont work and 400 a month was a little much plus my dad doesn't want me raceing right now

o ya and that is the brand new 06

o ya and anyone got any sugestions on what i should do for an exhaust system? im thinking a full exhaust so jets and filter are a must also

yoshi trs or hmf full system then just get a dyno jet kit, the yoshi tells u how to jet it, if u get the hmf, dont get there jets the dynojet kit is better

sparks or yoshi for the exhuast ;)
if you want i can post pics tomorrow of my pipe and bike to give you some ideas on modding your new z ;)

ROBBY!!!!! finially u got it! i looked at this and didnt notice it was you, come over!!!! looks good! now you have no excuse!  sweet quad....better than toms crapturd  :D

woohoo thanks ALAN!! ya ill be over soon enough my dad is going to build a trailer for my volvo! lol.....and klutch that would be great if i could check urs out and get some ideas cuz im ready to start moding thanks

I'm looking forward to returning the favor and rolling that one for you..LOL Just kidding I'll atleast wait until you roll a few times 2:L

alrighty then, ill pick up those pics i took today tomorrow after school and post some for you  ;)
oh by the way, i think their was a defect with the 06 models, something about a bad clutch plate, look in the technical forum, i think its their...

alright thanks klutch ill go check that out

Or a Rossier Engineering.... Nice Bike BTW

nice!  robby!

does it beat tom's raptor? 

thanks buddy....hell ya it beats toms raptor it destroys it lol...wait til i mod it a little then it will tear u up too  :D

hahahahahahaha!

thats all im gonna say! ;)

hey we'll see buddy dont be laughing yet im gunna be out on the track more and my dad is actually going to build me a trailer for my volvo! lol so im gonig to work on getting better and we'll see whos laughing then  :P

looks good ;D glad you finally got your own bike 8)

i love that quad i rode a new 06 and it handeled great, hope u have fun with it, and i think the yoshi TRS full system exhaust should do the trick for a pipe ;)

NICE!!!!!!! ;D

thanks guys its an awesome machine i love it glad i bought one and i think u guys are right im going to go with a yoshi trs full exhaust

nice  i haeva  05 kfx i went with a hmf  to match the orange havn't got a  header pipe yet.  um as far as a defect all i have heard  is that in the 05 -06 if the dealer puts  the  wrong collant in it caroads  and leaks into the engine

nice, i have a trs full system... ull love it, and u will destroy toms crapturd, i no i do! ;)

The first thing I would do is buy a 2004 clutch cover. I don't know if you are aware iof the problem with the 05 and 06 Z400/KFX400/DVX400. They change the clutch cover material to magneseum. The 2004 cover is aluminum. The woater from the coolant corodes away the magneseum cover. Eventually mixing the oil and coolant and causine engine damage. Not to mention the damage to the cooling system from all the metal fragments flowinf throught it. Sorry to be the bearer of bad news but here is a link to Z400 Central.
(http://img.photobucket.com/albums/v209/tlronny/pump.jpg)

http://www.z400central.com/invision/index.php?showtopic=52767&st=30 (http://www.z400central.com/invision/index.php?showtopic=52767&st=30)

yea that what  i was talkin about . the way i look at it  ill  let them be the one to fix it  till they  give me a recal notice im not changin it and with the stuff ive done to it it ont take  a hour to put it back to factory. so they made the mistake they will  get the new motor if it comes down to it

In my opinion that is the WRONG thing to do. I would buy the new parts. Fix the quad, because I wouldn't want to mess up my new quad HOPEING the dealer will fix it. Then save the old parts and the receipt and hopefully get reimbursed someday down the road.
 Once it does finally break
1) You will be without a quad.

2) If they haven't made it a recall who knows how long it will take to get the OK to fix it for free

3) What if they don't cover all or any of it you will be without a lot more than what the cover cost

Do what you want. I'm just trying to help you out.

mother of god people, when and IF the clutch cover fails, replace it!

its that simple, iv never had a problem with mine, i think that might be because i changed the coolent within 2 months of buying it.

i think that its not as big of a deal as some people are making it to look

I love the colors.....looks realy good!

ya thanks guys im deffinetly going to look into that clutch problem and see if were i bought it from can get me a new cover or somthing to fix it with and im pretty sure im going to go with the full trs system as far as i can tell it will be the best match for the quad

well if you break into the motor  your self with a  extended 5 year warranty then you void the warranty and if they don't  fix it  it will jsut  give me a reason to build a motor. and  the easiest way to fix it is just to change to  a coolant that want  harm the magnesium.

so if I replace the coolant that will stop this from ahppening? what kind do iget that won't hurt the magnesium?

im probably going to go with  amoil cause  i can get a discoutn with  a guy back home  ill give you more info on it when i get it . it been brought up with him before  i think with dales   but not sure so ill let you know

aight  found out throught a  few guys in a poast  in my back home forum. but they are recomending  usin evans. with dales they have the same issue and i know  few that have had dales for awhiel and are runnin evans ill let ya know  what i can get it for and mess shortly

Correct Evans is the only coolant that doesn't contain water. Water is the problem. You must flush the cooling systen 3 times wil 50% vineger and 50% water. This is the most important step. The system must be COMPLETELY DR before you refill with evans coolant. I don't know how to do that other than compressed air and just leaving the system open for a few days. Good Luck

whene you take the old exhaust off you will have to remove a coolent line on the cylinder(instructions will say exactly were) so u will drain the coolent anyway. so u mite as well just take the water pump off and check it out while theres no coolent in the bike, i did when i put my pipe on and it was fine

ok good ill look into that evans coolant if u guys fine out more about it soon let me kno I just ordered my new exhaust today and will be here maybe friday or monday of next week so I got some time but let me kno this sounds kind important thanks

so did ya go for the yoshi  8)

http://www.atvnc.com/forums/index.php/topic,16962.0.html   heres a link of  the evans being discussed. i waitin to talk to pete ( theoilguy) on pricin for delivery here  from is suplier ill let  ya know

ya I went for the yoshi I got the full pto carbon fiber system it will be here next week I can't wait and thanks for the info floyd let me kno what else u find about that coolant

yep will  do i wana say it liek 25 30 bucks not sure kinda steap for coolant but if ya gotta have it you gotta have it

ya i can live with spending somthing like that if it helps save my brand new quad and thats not to bad if thats all i have to do to make sure it wont get ruind

yea just gotta  flush and ry the system out and add only that coolant nothin else

well i got some new pics of my upgrades on my bike... so far i got mxr6's 20's up front and 18's in the back on black ITP Pro Locks i got and i got a full FMF Power Core 4 exhaust with a Powerbomb header (only reason i didn't end up with the yoshi cuz it was back ordered and i am wayyyy to impacient to wait) i got Pro Armour nerfs and i got a Pro Armour bumper, and i rejeted it with dyno jets and a Pro Design Hi flow air filter kit and i got a GForce axle set for +4 and Durablue +3 wheel spacers up front. Thats all iv got done right now but im getting my new bars really soon cuz i bent them pretty bad at the track today and im getting Alba blue and white graphics and some Alba carbon fiber stuff
(http://i71.photobucket.com/albums/i128/fatalpoopy/DSCN0187.jpg)
<br>
(http://i71.photobucket.com/albums/i128/fatalpoopy/DSCN0186.jpg)
<br>
(http://i71.photobucket.com/albums/i128/fatalpoopy/DSCN0189.jpg)
<br>
(http://i71.photobucket.com/albums/i128/fatalpoopy/DSCN0188.jpg)

Nice Add-on's man, I like those rims, how are they holding up?

Looking good Robby!!! Looked better all dirty on the track today! I had a blast!! You did awesome on that double today!!!


P.S. Your chain looks nice and tight now ;)

those rims are amazing especially with those tires after i got them on and got on the track holy crap HUGE difference, and so far only problem i had with those rims was a screw up by ITP they forgot some silcone inside the rim and it was leaking air but we got that fixed up and havn't had any promblems i love them and i think they are like the only black, other than hipers, bead lock rims so they were totally worth it kinda on the expensive side tho...i paid 1000 for rims and tires premounted plus that was with a 20% discount but to me totally worth it.....haha thanks eric u always pull threw for me when i need help with my bike thanks bro!

Man that looks SO GOOD!!!!

PS: OMGhi2U!!!!  :o

got the new graphics on finally did it all myself...i think i did pretty good
(http://i71.photobucket.com/albums/i128/fatalpoopy/DSCN0276.jpg)

(http://i71.photobucket.com/albums/i128/fatalpoopy/DSCN0283.jpg)

(http://i71.photobucket.com/albums/i128/fatalpoopy/DSCN0280.jpg)

(http://i71.photobucket.com/albums/i128/fatalpoopy/DSCN0278.jpg)

(oops i left the rag on the heel guard  ???)

dang rob that looks good!!!!!!!!!!!!    you did a good job on putting the graphics on!!!

looks good

awsome. 8) got to love alba!!!!!