Need some help on an oil leak

floutlaw1 · December 11, 2005, 07:23:31 PM

My Dad and I are working together to fix my lakota. We need help where the front sprocket bolts on oil is comming out. There is a small round spring that was behind the sprocket that was not there before. We are working together to repare the bike and dont want to take it to get fixed. Need to know what the name of the seal and the spring and how it is put on.....

(US)

floutlaw1 · December 12, 2005, 02:15:02 AM

ANYONE?

??

floutlaw1 · December 12, 2005, 06:34:59 PM

okey, I found out the out shaft for the sprocket has a collar on it and the spring is a o ring what keeps the oil in?

?

Moose · December 12, 2005, 07:17:50 PM

Look your quad up here, it shows all the factory drawings.

http://www.bikebandit.com/partsbandit/OEM-Parts~mscssid~WGM8R5WM03XS8JEXHHMCHBJHUAU22HBF.asp

TOY_DOCTOR · December 12, 2005, 10:07:37 PM

Sounds like you need a countershaft oil seal, the spring you are refering to is part of the seal.

floutlaw1 · December 13, 2005, 01:05:10 AM

Thanks toy doctor, I tried your web site, would not load. Is that the seal behind the sprocket, if so thats the one.

AintSkeered · December 13, 2005, 01:15:19 AM

You can try digging-out the old one and pressing a new one in(if you have the correct-sized oil seal press). If that works, great. If it doesn't, that because the inner oil seal might be bad, too.

cutngrs · December 13, 2005, 01:20:39 AM

first there is only one seal on the out put shaft and you will have to split the cases to change it this is not a hard job but is a lot of work if you have not done this befor