Rubber removal

Started by Chillinthemost, November 05, 2005, 12:03:58 AM

Previous topic - Next topic

klutchbuster400

Quote from: Honda250ex on November 11, 2005, 08:29:08 PM
I had a 6.0 and the injectors blew 4 times!!!.......Can you say 7.3!! iT IS ALot SLOWER IT GOT ONLY 250HP AND THE 6.0 HAD 325!! >:( mAN THAT WAS A FAST TRUCK
all this and youre only 12 years old, ok i can play along, i flew my first private jet when i was 5................

Bigscrb15

Quote from: klutchbuster3fiddy on November 12, 2005, 05:20:00 AM
Quote from: Honda250ex on November 11, 2005, 08:29:08 PM
I had a 6.0 and the injectors blew 4 times!!!.......Can you say 7.3!! iT IS ALot SLOWER IT GOT ONLY 250HP AND THE 6.0 HAD 325!! >:( mAN THAT WAS A FAST TRUCK
all this and youre only 12 years old, ok i can play along, i flew my first private jet when i was 5................

Why did you wait so long before you bought your jet?


The whole engine arguments can go on forever, every engine is gonna have its followers and haters, just like the brand they are all about the same, just different people with different experiences. I wish my truck would burn out like that. When I finally get it to spin the rear tires only 1 spins :( I hate limited slip!!!
"When once you have tasted flight, you will forever walk the earth with your eyes turned skyward, for there you have been, and there you will always long to return."

2006YFZ450

Quote from: cutngrs on November 12, 2005, 04:09:15 AM
Quote from: Raptor700R on November 12, 2005, 12:01:04 AM
I remember when you had the new 6.0,  but I think you didn't break it in properly your dad was florring it the first day he got it with your trailer.  But it was really fast before it broke down.


break em in the way you want it to run   break in like sissi it will run like one break in hard and it will run hard

Yea that's true but "Honda250ex" truck was running crappy from Day1.  But my uncle bought a  F-350 Dually Turbo Diesel and he was driving it hard.  We took it to his property in Zepherhills and were doing donuts and figure 8's.  The spedometer read 50mph.  When we were doing donuts and then the truck just stalled and we found out the trauck's oil pump died.  So I always take it easy on new engine's except the Evinrude E-Tecs'
'06 YFZ 450
'03 F150 SVT

[url="http://www.sponsorhouse.com/members/2006YFZ450"]http://www.sponsorhouse.com/members/2006YFZ450[/url]

NPRVinson

My brother bought a new F-350 and we were doing wheelies with it and it was stalling out. Come to find out it had the new Evinrude E-Tec diesel in it but we were putting pre-mixed gas in it and blew the rear main seal in the windshield wiper motor.

LakeMaryKid

Quote from: NPRVinson on November 12, 2005, 02:42:28 PM
My brother bought a new F-350 and we were doing wheelies with it and it was stalling out. Come to find out it had the new Evinrude E-Tec diesel in it but we were putting pre-mixed gas in it and blew the rear main seal in the windshield wiper motor.

LMGDAO
2003 KFX 400
1994 F-150 - 12" SAS 38.5 Boggers
2007 F-150 Supercrew FX4 Luxury
2004 14' Mirrocraft

gery350

Quote from: NPRVinson on November 12, 2005, 02:42:28 PM
My brother bought a new F-350 and we were doing wheelies with it and it was stalling out. Come to find out it had the new Evinrude E-Tec diesel in it but we were putting pre-mixed gas in it and blew the rear main seal in the windshield wiper motor.

no, no, no.  its the muffler bearing.
geeze, dont you know anything.
hey this is klutchbuster350, me and rl400*mostly rl400* made my dad this sig. now lets see how long it takes him to notice lol
hey while im here...........klutchbuster rules!!!!!!
[url="http://i6.photobucket.com/albums/y235/klutchbuster350/gery350_3.gif"]http://i6.photobucket.com/albums/y235/klutchbuster350/gery350_3.gif[/url]

o4250

My sisters boyfriends brothers ex-girlfriends uncle bought a f-1450 (only 5 were made in the world) and he put gas in it, instead of diesal, and it went a jillion times more fast than normal. ;D

yunt2ride

Quote from: LakeMaryKid on November 12, 2005, 02:45:08 PM
Quote from: NPRVinson on November 12, 2005, 02:42:28 PM
My brother bought a new F-350 and we were doing wheelies with it and it was stalling out. Come to find out it had the new Evinrude E-Tec diesel in it but we were putting pre-mixed gas in it and blew the rear main seal in the windshield wiper motor.

LMGDAO

Hey kid. I have noticed that you have changed your attitude lately. Don't let the quad go to your head. Has it come to using gods name in vain.
1997 Chevrolet 4WD extended cab
2005 Polaris 500HO 4X4 Hunter Edition Camo

o4250

Quote from: yunt2ride on November 12, 2005, 04:10:07 PM
Quote from: LakeMaryKid on November 12, 2005, 02:45:08 PM
Quote from: NPRVinson on November 12, 2005, 02:42:28 PM
My brother bought a new F-350 and we were doing wheelies with it and it was stalling out. Come to find out it had the new Evinrude E-Tec diesel in it but we were putting pre-mixed gas in it and blew the rear main seal in the windshield wiper motor.

LMGDAO

Hey kid. I have noticed that you have changed your attitude lately. Don't let the quad go to your head. Has it come to using gods name in vain.




Laugh
My
Gosh
Darn
Ass
Off

NPRVinson

Quote from: gery350 on November 12, 2005, 03:28:28 PM
Quote from: NPRVinson on November 12, 2005, 02:42:28 PM
My brother bought a new F-350 and we were doing wheelies with it and it was stalling out. Come to find out it had the new Evinrude E-Tec diesel in it but we were putting pre-mixed gas in it and blew the rear main seal in the windshield wiper motor.

no, no, no.  its the muffler bearing.
geeze, dont you know anything.

Gery we replaced the muffler bearing every 2000 miles along with the alternator fluid it can't be that.

o4250

Quote from: NPRVinson on November 12, 2005, 04:26:13 PM
Quote from: gery350 on November 12, 2005, 03:28:28 PM
Quote from: NPRVinson on November 12, 2005, 02:42:28 PM
My brother bought a new F-350 and we were doing wheelies with it and it was stalling out. Come to find out it had the new Evinrude E-Tec diesel in it but we were putting pre-mixed gas in it and blew the rear main seal in the windshield wiper motor.

no, no, no.  its the muffler bearing.
geeze, dont you know anything.

Gery we replaced the muffler bearing every 2000 miles along with the alternator fluid it can't be that.







loks like y ou need NEW TRANSMISSON AND GEERES :-\ :gr :tsktsk.gif :ThumbsDown.gif

L.E._YFZ_2005

what bout your blinkerfluid dont leave that out if you run without that  your screwed
[url="http://img.photobucket.com/albums/v640/lakemarykid/justin.jpg"]http://img.photobucket.com/albums/v640/lakemarykid/justin.jpg[/url]

2006 yamaha  yfz 450 with dual exhuast!!
2005 ford f-250 Crew cab fx4 desiel (wanna race??)
2005 yamaha  r6  raven edition


sold:
2004 honda 440ex atp'd
2004 kawasaki  jetski 120

gery350

Quote from: NPRVinson on November 12, 2005, 04:26:13 PM
Quote from: gery350 on November 12, 2005, 03:28:28 PM
Quote from: NPRVinson on November 12, 2005, 02:42:28 PM
My brother bought a new F-350 and we were doing wheelies with it and it was stalling out. Come to find out it had the new Evinrude E-Tec diesel in it but we were putting pre-mixed gas in it and blew the rear main seal in the windshield wiper motor.

no, no, no.  its the muffler bearing.
geeze, dont you know anything.

Gery we replaced the muffler bearing every 2000 miles along with the alternator fluid it can't be that.

you've left me dumb-founded.


DAMN LEPRECHAUNS!
hey this is klutchbuster350, me and rl400*mostly rl400* made my dad this sig. now lets see how long it takes him to notice lol
hey while im here...........klutchbuster rules!!!!!!
[url="http://i6.photobucket.com/albums/y235/klutchbuster350/gery350_3.gif"]http://i6.photobucket.com/albums/y235/klutchbuster350/gery350_3.gif[/url]

Bigscrb15

Quote from: gery350 on November 12, 2005, 05:30:16 PM
Quote from: NPRVinson on November 12, 2005, 04:26:13 PM
Quote from: gery350 on November 12, 2005, 03:28:28 PM
Quote from: NPRVinson on November 12, 2005, 02:42:28 PM
My brother bought a new F-350 and we were doing wheelies with it and it was stalling out. Come to find out it had the new Evinrude E-Tec diesel in it but we were putting pre-mixed gas in it and blew the rear main seal in the windshield wiper motor.

no, no, no.  its the muffler bearing.
geeze, dont you know anything.

Gery we replaced the muffler bearing every 2000 miles along with the alternator fluid it can't be that.

you've left me dumb-founded.


d**n LEPRECHAUNS!

It wasn't the leprechauns, it probably ran low on 710 fluid!! Check to make sure it wasn't low, look for this cap to find it.


"When once you have tasted flight, you will forever walk the earth with your eyes turned skyward, for there you have been, and there you will always long to return."

Dr.Dirt

You people are so stupid. The speakers need changed every 10,000 miles. I can't believe your parents even let you drive a car if you can't remeber something so simple. I also found out that if you let the axle pistions go without a Carbon Dioxide change you will blow your door panel sprocket.

raptor426

Quote from: Toomey on November 05, 2005, 01:47:59 PM
Looks just like the Squares in Naples.
ya, that is exactly what I was thinking when I first looked at the pics
2005 Yamaha Raptor 660r #26:AC grab bar, Alba Pro Elite nerfs, Uni filter, UM full body skid, AC swingarm skid, White Bros R4 slipon
2005 Yamaha Grizzly 660:27" Mudlites, 12" C-series rims, 2500# winch
2003 Yamaha YZ426F:stock
2002 Honda Rancher:27"Mudlites
2001 Polaris Scrambler 400

440ex

98% of all ATV'ers FLOOR their quad if your the 2% then copy thise into your signiture



440ex is pretty fast but not as fast as most. and we tink my bro has lt500r but not sure its fast ass mofo thou and i race mxx sometims

RL400

Quote from: Bigscrb15 on November 13, 2005, 12:51:04 AM
Quote from: gery350 on November 12, 2005, 05:30:16 PM
Quote from: NPRVinson on November 12, 2005, 04:26:13 PM
Quote from: gery350 on November 12, 2005, 03:28:28 PM
Quote from: NPRVinson on November 12, 2005, 02:42:28 PM
My brother bought a new F-350 and we were doing wheelies with it and it was stalling out. Come to find out it had the new Evinrude E-Tec diesel in it but we were putting pre-mixed gas in it and blew the rear main seal in the windshield wiper motor.

no, no, no.  its the muffler bearing.
geeze, dont you know anything.

Gery we replaced the muffler bearing every 2000 miles along with the alternator fluid it can't be that.

you've left me dumb-founded.


d**n LEPRECHAUNS!

It wasn't the leprechauns, it probably ran low on 710 fluid!! Check to make sure it wasn't low, look for this cap to find it.




LOL THAT LOOKS LIKE OIL UPSIDERED DOWN!