+2 axle and spacers?

Started by wheelie_boy, November 04, 2005, 12:53:49 PM

Previous topic - Next topic

wheelie_boy

It200 told me about getting the heavy duty +2 axles and the wheel spacers for the front.  Ive been reading adds for wheel spacers and one of them said " for bigwheel/tire kits.  So i was wondering if the wheel spacers are also +2, to match the longer rear axle? thanxs for any help.
05 kx 250f

WOODY_450r

#1
You can get wheel spacers at any size I have seen wheel spacer that are 4''  and if you get a rear axle the usally come a little bigger than +2
WHEN IN DOUBT FLOOR IT !!!!!!!!


JOSH WOODS #411

05 450r
01 chevy 4x4

wheelie_boy

O ok kool. i wasnt sure if the wheel spacers were actually made for just extending them out.
05 kx 250f

Toomey

Aftermarket rear axles are usually adjustable from a total width gain of 2 inches or 4 inches, so you get 1 or 2 inches on each side.
On the front, you will usually get about 2 to 3 inches of total gain, or 1 or 1.5 inches per spacer.
Looking for a junker dirt bike project.

2006YFZ450

If you get rear axles get the adjustables.  They are awsome you can make your rear axles wide or narrow. Some where like 2-4in.
'06 YFZ 450
'03 F150 SVT

[url="http://www.sponsorhouse.com/members/2006YFZ450"]http://www.sponsorhouse.com/members/2006YFZ450[/url]

WOODY_450r

Thats what I have the ajustables they are awsome!!!

They are good for everything.
WHEN IN DOUBT FLOOR IT !!!!!!!!


JOSH WOODS #411

05 450r
01 chevy 4x4