Pics from Eurika ride...

Started by Ride1Rob, July 31, 2005, 02:03:50 PM

Previous topic - Next topic

Chuck_Norris


YFZ450-Tampa

Hey Rob, that look's nice, nice pics, you sure had a nice ride, good for you guys, let see if I can joing you guys next time.
Luis C.
Luis 
                              Quad #29 
                                 XC

felix_z-4

Quote from: Da_Mtg_Man on July 31, 2005, 03:17:35 PM
Rob,Felix,
Whose camp is that?
I just got the Rappy back and need to ride it soon, When you going again?
You let me know when you're ready,we'll make it happen. WE usually start riding about 10am break for lunch and ride till we run out of gas.Ask Ride1rob about that..

YFZ450-Tampa

Hey Felix !!! how far is this from Tampa ?
Luis 
                              Quad #29 
                                 XC

felix_z-4

Quote from: YFZ450-Tampa on August 01, 2005, 01:43:00 AM
Hey Felix !!! how far is this from Tampa ?
It's about 25 miles north of Big Scrub.Near Eureka Dam.

YFZ450-Tampa

Not that far !!! seems to be close to Hug Valley !!! but any way, just let me know when are you guys going up there.
Luis 
                              Quad #29 
                                 XC

felix_z-4

Quote from: YFZ450-Tampa on August 01, 2005, 02:26:24 AM
Not that far !!! seems to be close to Hug Valley !!! but any way, just let me know when are you guys going up there.
No problem,I usually go up there once or twice a month.I'll keep in touch w/ ya.

Ride1Rob

Quote from: YFZ450-Tampa on August 01, 2005, 12:58:53 AM
Hey Rob, that look's nice, nice pics, you sure had a nice ride, good for you guys, let see if I can joing you guys next time.
Luis C.

From what I was told... you were supposed to go this time :-\. You weren't the only one that was a "No show though".
If it'll run... I'm ridin'!!!

YFZ450-Tampa

Sooooooooorrryyyyyyyyyyyy !!! Rob, I now, you call me and then we didn't talk after that, I gues I should call you back and the something came up. Keep me updated
Luis 
                              Quad #29 
                                 XC

koh0001

2006 680 Rincon- HMF pipe, snorkle, rad relocated, 2 1/2" lift, highlifter springs
2004 LSR CRF 450r Hybrid MX, nolink swinger
2001 LSR 330R -XC setup, nolink swinger
1988 TRX 344R TT nolink swinger, PEP's 
07 Eiger 400, HMF pipe, snorkle, crushlocks & 28" Outlaws
1994 TRX 90 Dual A arms
2 atc 70's

1STOCKEX

Hey guys well its good to see we might have more for the next run.  Let me know!  You know I'm in.  Later.  Hey Rob, canister on its way?

Ride1Rob

#36
Quote from: 1STOCKEX on August 02, 2005, 04:50:41 AM
Hey guys well its good to see we might have more for the next run.  Let me know!  You know I'm in.  Later.  Hey Rob, canister on its way?


No, just spent 3+ on wheels and tires. Will have to patch this d**n GYTR up once again. They suck arse >:(. It holds together while riding MX. But an all day trail ride... No chance.
If it'll run... I'm ridin'!!!

1STOCKEX

Hey Rob I'm thinkin if you leave the current set up on the bracket and rivet the holes around it, it should hold up now.  If not I was thinking you should get a piece of hose, slice it in half and redo the patch job we did then go and rivet the rest.  It should hold.  Anyway just thinkin out loud.  Lookin forward to the next run. Asta.

Ride1Rob

Quote from: 1STOCKEX on August 04, 2005, 02:25:05 AM
Hey Rob I'm thinkin if you leave the current set up on the bracket and rivet the holes around it, it should hold up now.  If not I was thinking you should get a piece of hose, slice it in half and redo the patch job we did then go and rivet the rest.  It should hold.  Anyway just thinkin out loud.  Lookin forward to the next run. Asta.

I've done all of the above. The pipe performs well, just a peice of snit as far as durability. AND GET THIS... Called one of my local dealers to order 2 more brackets and the rubber peices b/w them and the canister. ($34... FOR ONE :o) I need 2 of em >:(.  That's $70 for the brackets.

So I patched it up (AGAIN) yesterday. Used a heat treated lock tite this time as well as locknuts on the inside instead of the regular nuts. Went to AutoZone and bought rubber holders for a Car exhaust and cut 2 peices from it. Placed it b/w the canister and the brackets. It's definitely secure. Hopefully it holds for a bit til I order my Sparks, NMotion, or Trinity. Dreth talked to my yesterday about Thunder Alley so they're in the mix as well ;). One thing for sure though... I'LL NEVER BUY ANYTHING FROM GYTR AGAIN!!!
If it'll run... I'm ridin'!!!

1STOCKEX

There you go nuthin wrong with that.  McGyver anyone?   ;D  Anyway I need to get that airbox fixed and ready for the next ride.  Hopefully I'll see you at the next one.  Felix and I are thinkin in about 2 weeks. I'm sure we'll  let you know.  Asta.

BIGWORM3699 ( ECP RACING)

East Coast Performance Mini Quad is your
Official Apex and DRR mini quad dealer, For your mini quad performance parts and tuning needs.
2013 polaris ranger camo
KINGQUAD, 29.5 outlaws,snorkled,rad. relocate, clutch mod.
APEX, stage6 RT 70, elka,mallosi overrange,PVL ign.

Asphaltdragon

great pics! Thanks for sharing :)
Yellow '02 Honda 400 EX +ATP
Yellow '01 Bombardier Traxter XT
Orange '02 DS 650 Baja