anyone ever plug or patch a sidewall small cut...

Started by dirtycruiser, April 29, 2009, 06:05:42 PM

Previous topic - Next topic

dirtycruiser

Did it hold? Any secrets? I've already purchased a replacement, but hate to trash it with such a tiny cut in the sidewalk and low milage. I'm thinking a patch/plug combo , just happen to have one in the drawer.(it's like findind an old condom
In your bedside dresser. ) I've seen it in there for years but never had a need for it, until now.  I bet it's at least 10 years old. Thinking maybe using garilla glue instead of rubber cement. Tire is a ITP mud lite xtr 27 11R 14.  Cut might be a half inch long, if that.
2009 Renegade 800r X
2007 Outlander 800 Max LTD
27" Mudlite XTR's on ITP 14" SS212, SS106 rims
Precision Racing Steering Stabilizer
Dobeck Gen 3 electronics
BRP HD front springs
Warn XT 30 winch
HMF Exhaust pipe
Dalton Pro Clutch
Ricochet Skids
K & N filter
Insurance

VForcedave

Sorry, but I could not resist, I was getting ready to ask some questions on SIDEWALK Repairs. 
2004 Kaw Vforce 700 twin. Mine
2005 Honda Rancher 350 Kev Mans
2002 Yamaha 80 Raptor Kev Mans
2000 Jeep Wrangler 4" lift, 33's, winched
1988 Harley FXRP Dropped and chopped
2003 Chevy Duramax 100+K and still cruising. 18mpg.

Justardnck

I have done repairs with several plugs... 4-5 plugs and they have held well as long as I used rubber contact cement.

dirtycruiser

Vforce, thanks, the friggin iPhone changes my spelling, usually the wrong way.
2009 Renegade 800r X
2007 Outlander 800 Max LTD
27" Mudlite XTR's on ITP 14" SS212, SS106 rims
Precision Racing Steering Stabilizer
Dobeck Gen 3 electronics
BRP HD front springs
Warn XT 30 winch
HMF Exhaust pipe
Dalton Pro Clutch
Ricochet Skids
K & N filter
Insurance

Justardnck

You could also always get a tube for it too. My buddy got one installed for $30 total cost at Pat's tire in West Palm Beach

crom A zone

j b weld  super glue and  patch/plug will fix rim/tire    dont ask me how i no    but i will tell u in works ran arond on rim and tire like that for bout 7 months never leaked
2008 brute force 750

30inch itp mulite xxl on ss108s
rad reloated and mimb snorkles
gold/red epi clutch springs
hl springs and extream 2inch lift

CEC

Once you push the plug in the tire, leave some of the plug sticking out and light it with a lighter and let it burn almost to the tire and then put out the flame. It will let the plug melt to the tire and the spot where it goes though the tire.
2001 EZ GO LIFTED 5 INCHES ON 22'S
04 400 EX
04 400 EX
05 Terminator 50
06 Polaris Pred. 90
99 Kaw. KX 100

dirtycruiser

Damn great info, I read the Gorilla glue label and there's no mention about working with rubber. Gonna try a few different things tomorrow. Before commiting to one that might not work for $hit.
   I was able to get a new tire for $101.00 and $20.00 for mounting, at a local dealer. He had two identical tires for $101 and $120 >:D. Damn good thing I looked :o at the other tires price. Online there $130+ shipping???
2009 Renegade 800r X
2007 Outlander 800 Max LTD
27" Mudlite XTR's on ITP 14" SS212, SS106 rims
Precision Racing Steering Stabilizer
Dobeck Gen 3 electronics
BRP HD front springs
Warn XT 30 winch
HMF Exhaust pipe
Dalton Pro Clutch
Ricochet Skids
K & N filter
Insurance

AintSkeered

You're only running 4-6 lbs of pressure and won't be on the Autobahn, so, a plug's fine.
2015 Can-Am Outlander XT-P by Perry Performance Group

05greengriz

I had the samae type of tire with the same type of cut. Just spend 8 bucks at a tire shop and have them put a "boot" on the inside of the tire.
07 Eiger
06 fsc 2800 weekend warrior
06 Rhino       
2005 Scardy Cat 500 4x4
2006 Acrtic Cat DVX 90
http