Ignition Problem 2006 Rhino

[GrizzlyBear]

the other day, I started my rhino and it was fine, I moved it, shut it off, then later I tried to start it again, and NOTHING, and I mean nothing. no ignition lights, nothing on the dash and absolutely no power to anything.  I tested the battery, it is fine, I rested eash fuse, they are OK, checked the wiring, its fine.  HELP,  what could it be?

[yfz450runner]

Check your grounding points on the frame. Also check the keyed ignition,sometimes they hit a dead spot. Aslo are there any saftey switches? If so check them by bypassing one at a time untill you find the bad one. Hope this helps.

[GrizzlyBear]

I've checked the grounding points, they are ok.  What are safety switches, and what do they do?

[lswjth2]

Grizz, make sure that the rhino is in neutral, do you see the neutral light show up in the panel? Put your foot on the brake and try it again,That's a safety switch so that it wont start in gear..

[GrizzlyBear]

OK, that helped a little.  Now the dash comes on and I know I am in nuetral.  But still nothing, and I mean nothing.  and I have the foot brake on

[yfz450runner]

Sent you an e-mail to your home e-mail adress. Hope it helps.

[GrizzlyBear]

Did not get email,  please resend to both  Terry@onfa.org and Terry@1sthome.cc  Thanks

[GrizzlyBear]

OK. I have the problem isolated to the fuse box.  I have removed every fuse, one at a time and what I get is a buzzing in the box when I turn the ignition key.  It does not matter if a fuse is removed or not.  By the way, all fuses are good.  I got the email with the parts cataloge.  Thanks

[lswjth2]

Grizz, there's an ignition relay in there, that's what probably is causing the buzzing..I'm going to send you the service manual...

[GrizzlyBear]

ordered ignition relay, but it is back ordered, hope it comes soon,  Thanks for the help everyone.