Wobbly front tires/hubs

[cheapthrills]

The front hubs and tires of my son's Suzuki eiger have some wobble to then, removing the tire shows the hub has some play in it. Would this be from worn bearings or some other problem?

Thanks in advance.

[crom A zone]

9/10  its wheel berrings  i break them all the time on my eiger  very easy and cheap todo.  check the knuckle between the upperball joint   and tie rod    they tend to crack right there alot also.  anything else u need on eiger feel free to post or pm i am the man at working on them   i got a pink  and green one on tractor tires   with lift and motor work also

[cheapthrills]

Thanks for the help, the tie rods seemed fine but even with the tires off you could move the hub and shaft. Is there 2 bearings on each side and would you normaly repalce the dust seal when doing the job.

[crom A zone]

there is one bearing in the side make sure knuckle not cracked and if u need a dust sheild    get it if not than dont     they break alot  so buy alot of bearings and also the main bushing for the steering goes out alot too  but u def got bad bearngs  i am 100% sue if the hub is moving.   if u live down south i can do them for small fee

[cheapthrills]

Hey Matt, thanks again, I'm in Jupiter, otherwise I might take you up on the offer.

According to the diagram I have seen, they have a bearing, spacer, bearing again, then dust sheild on the outside of the stearing knuckle. On the inside of the knuckle is just a dust sheild. Which items do you need to buy, all of them?

[/img][/img]

[crom A zone]

if your seals   are in good shape   just get 2 number 14  for each side.    cheack ebay they should have the whole kit for $29.99   that comes with both side bearings  and seals.   they do need to be pressed in and out.  or hammer and a  punch works good also.   anything else u need just post up.   i am up around turnpike and exit 133 alot its only hour  from my house.

[cheapthrills]

Thanks for the ebay tip, thats awsome, hge savings over buying from the dealer.

My son seems capable of the job, going to have him do it. Thanks again for the help, it use extreamly useful, I owe you one.

[crom A zone]

glad i could help   if u never need anthing o do work on all types of bikes.

[cheapthrills]

Hey matt, sent you an offer on doing these bearings via PM

[crom A zone]

sent you pm back  with my number

[Gato]

I am changing them on my artic cat 400 it is def the bearings. Sorry matt I got it but hell you can still pm me lol I still am going to do the snorkel I am going to hook you up with some buis I got 2 grizz, my rincon & 1 rancher hell with all that mine might be free YEEHAA saw your pics in muddigras to nice pink looks great on you

[crom A zone]

lol   bike only ran for few hours   i blew the clutch  and belt lol    i ordered parts   she be ready for muddi gras at l cross in march.       just let me no bout snorkles   ill get them done for u gato   for cheap  too