ATV's for Dummies

Started by jwscroll, June 11, 2005, 09:54:07 AM

Previous topic - Next topic

jwscroll

How about some posts on the less technical stuff like stuffing an inflatable ball in the front frame so that when you hit deep water the front floats, or sticking a golf tee in the bowl drain to prevent water from backing up into the carb. Think cheap, cheap, and redneck.
Hold
On
Not
Done
Accelerating

BC-LC-500s

What about a fishing reel for a winch?
2004 polaris sportsman 500 4x4
2004 polaris sportsman 500 4x4
2001 polaris scrambler 500 2x4

jwscroll

I know there's more redneck engineers than this.  >:( >:(
Hold
On
Not
Done
Accelerating

rubicon500kid

will aa basket ball in the front frame realy work
DROP & DESTROY
87 s10 2/3 soon to be bagged
85 honda 110 atc(22" bearclaws & snorkeld)
01 kx 125 (pc pipe,tag bar's,pro racing rear rim,some lil other stuff
I hate it when you microwave something, then you start eating it, and it's cold in the middle...makes me wanna punch a

Da_Mtg_Man

Quote from: rancher350kid on June 12, 2005, 03:50:39 PM
will aa basket ball in the front frame realy work

Yes it will work. I've also seen the white boat bumpers strapped under each front fender.
FLORIDA MUD RIDER

qt314nfla

Quote from: BC-LC-500s on June 11, 2005, 11:43:00 AM
What about a fishing reel for a winch?

I don't care who you are...that's some funny stuff.

jwscroll

I'm trying to picture the size of the reel :D :D
Hold
On
Not
Done
Accelerating

Da_Mtg_Man

It won't work unless you use braided line and a Penn 6500 or bigger.  ;D
FLORIDA MUD RIDER

wilburz

Moonshine in place of gas = more horsepower!!!
1978 ridin mower, 48 inch cut, 3.4 hp briggs & stratton
12-6-3 front
14-8-5 back
no muffler

sk8r_dude

How about bringing a small boat anchor so when your alone and stuck with no trees around, you can have a place to hook your winch to.  Or when your miles from camp and you rip a large hole in your tire's side wall stuff it full of grass or other plant material to get you home.
05 Grizzly 660, 2500 winch, Garmin 276c GPS, Quad Boss trunk

05 Grizzly 660 Camo, 2500 winch, Quad Boss trunk 

[url="http://www.beachinlineskates.com/"]http://www.beachinlineskates.com/[/url]
[url="http://www.123skate.com/"]http://www.123skate.com/[/url]
[url="http://www.store.yahoo.com/beachinlineskates/"]http://www.store.yahoo.com/beachinlineskates/[/url]
[url="http://www.authorized-sunglasses-watches.com"]http://www.authorized-sunglasses-watches.com[/url]

jwscroll

Used medical tape from firstaid kit to make temporary pipe fitting over the carb to piston manifold. Worked for the hour it took to get back to the trucks.

[attachment deleted by admin]
Hold
On
Not
Done
Accelerating

Lost Soul

Try slitting two 1 gallon plastic milk jugs in half and crazy gluing each one to the handlebars as hand guards.
You can paint them like the rebel flag if you like.

mudhawg

a little moonshine never hurt anything lol ,and the ball trick really works,elect fishin reel works better
700 sportsman 30inchmudlites tech4 exhaust,lift kit,clutch kit,dobeck control box

jwscroll

I like to use empty milk crates for storing my cooler on the front.Strap the crate to the rack then bungie the cooler  in.
Hold
On
Not
Done
Accelerating

SwampRat

I think a set of curb feelers would look great on an ATV.  Perhaps a "How's my driving?" bumper sticker or a roll bar made out of PVC pipe.
06 F-250 4x4 PSD TowCommand
06 Weekend Warrior FS2300; Onan 4KW Genset
05 Suzuki King Quad; 27" 589's; 2.5 Warn Winch; Garmin Map76 GPS
[url="http://i10.photobucket.com/albums/a126/SwampRat_/Avatars/mudriders.jpg"]http://i10.photobucket.com/albums/a126/SwampRat_/Avatars/mudriders.jpg[/url]

jwscroll

Anybody ever put a tractor muffler called an AC 3 on their ride? Is it like snorkeling the exhaust or is it just a muffler?
Hold
On
Not
Done
Accelerating

J.D.

Arctic Cat 500 man. Dyno Jet , Snoorky , 14's , Cup Holder , Pro-Com CDI , K&N filter , .......To Be Continued ! 2001 Suzuki RM 250 ,Fatty Pipe , FMF muff ...

jwscroll

Found AC3 mufflers at the Tractor supply center, had to order it,$35. I'll let you know how they perform. Have been told that these are just as good as the expensive models, We'll see.
Hold
On
Not
Done
Accelerating

johnnygun

what? did everyone forget about the 22lr shell in the fuse box under the seat. you'll shoot your eye out kid!

who saw myth busters try this on t.v.?

love,

cletus
2005 arctic cat 500LE, snorkel, ITP 589'S,WARN Winch, k&n air, Vision black 161 wheels, SPEEDWERX pipe'd & jetted.
2006 arctic cat 400,WARN Winch, k&n air, cat alloy 7-spoke wheels.
1985 Honda ATC 250sx, UNI air, ITP alloy's.
old everglades swamp rat..area 3-A, camp 23

spacerider

Wait till you see what I am gonna do.....
1. Gonna fabricate chopper like handle bars ..not to much of a pitch bend to maintain control
2. Make that with a twist throttle
3. Fabricate a seat mounting plate and put a single chopper like seat in there but make it so the I can access the air box and battery

I am looking forward to having the first atv-chopper

Right now I am working on the measurements for the handle bars
Ride till you reach the stars.......................

jwscroll

Hold
On
Not
Done
Accelerating

spacerider

jw - i will have before and after pics - i found the bars i want now i need to get the twist kit
I will have progress pics and post them once i get everything
Ride till you reach the stars.......................

GSPKurt

Quote from: Lost Soul on June 16, 2005, 08:44:31 PM
Try slitting two 1 gallon plastic milk jugs in half and crazy gluing each one to the handlebars as hand guards.
You can paint them like the rebel flag if you like.


:D :D :D :D :D :D :D :D :D :D
Kurt Hargarten
2005 Suzuki Eiger 4X4 5 speed
Warn Winch