polaris xplorer 250 wont start

1sikgti · January 20, 2009, 08:30:08 PM

Hi I got this atv a couple months ago but before i got it it has been stting outside for a 1year or so. ok here is the problem i try to started and didn't have any spark check and the coil was broken. replaced coil, also flywheel magnets came apart, replace flywheel magnet and stator. new cdi . still have no spark can't get it to crank from switch either have to jump solenoid to get it to crank. any info will be appreciated Thanks in advance.

MedicMudder · January 20, 2009, 10:03:10 PM

I having the same problem(kinda) I have a 500 sp HO replaced=starter,solenoid,Bendix,battery,now replaced the headlight/reverse override/on-off switch module thingy. mine still is dead

but have that looked at on yours. try dropping toy Doc a text.

1sikgti · January 21, 2009, 10:13:34 PM

^ maybe the cdi box is bad? or stator?

MedicMudder · January 21, 2009, 11:50:19 PM

figured it out,a wire on the solenoid was broken,could not tell till I put a test light on it.I got a Polaris Manuel might be able to help you with your bike.

1sikgti · January 22, 2009, 06:00:34 PM

now it cranks but no spark i am lost......

quadguy33 · January 22, 2009, 08:09:40 PM

wear are you located maybe some one nearby can help

1sikgti · January 22, 2009, 08:49:11 PM

tarpon spring fl

MedicMudder · January 22, 2009, 09:06:48 PM

did you try the toy doc?

1sikgti · January 22, 2009, 09:27:38 PM

Quote from: MedicMudder on January 22, 2009, 09:06:48 PM
did you try the toy doc?

its he around the pasco pinellas area? how much he charge and hour? or does anybody knows about a good shop around pasco pinellas area beside the dealer?