Running Light Wires

Started by shawnley1222, November 14, 2008, 06:34:05 PM

Previous topic - Next topic

shawnley1222

Does anybody have a good technique to run wires through the frame???  I'm going from down by the battery box to the top back part of the cage for a back-up light.
07 Rhino With Lots Of Goodies!

FL SxS Riders
[url="http://flsxsriders.forumotion.com/"]http://flsxsriders.forumotion.com/[/url]

Muddbuggy

shawn
I ran my speaker wires down one of the wire looms and then follow the brake light wires up, with no problems from heat or snaggs.
GOTTA HORNEY RHINO....06' CAMO
07' OZARK 250
05' Z250
05' Z400 ACnerfs/beadlocks/carbon fiber Yoshi


SEABEEJIM IS A CLOWN PUNCHER.....

shawnley1222

07 Rhino With Lots Of Goodies!

FL SxS Riders
[url="http://flsxsriders.forumotion.com/"]http://flsxsriders.forumotion.com/[/url]

Muddbuggy

follow the wires from your voltage regulator down to the wiring harness and it will run down under the engine on the inside of the frame rail all the way back.
GOTTA HORNEY RHINO....06' CAMO
07' OZARK 250
05' Z250
05' Z400 ACnerfs/beadlocks/carbon fiber Yoshi


SEABEEJIM IS A CLOWN PUNCHER.....

shawnley1222

Im on board now thought about it and figured it out thatnks kevin but im gonna run it up because my light is goin up top next to the passenger headrest backup/cargo/cooler light 3 in 1  :)
07 Rhino With Lots Of Goodies!

FL SxS Riders
[url="http://flsxsriders.forumotion.com/"]http://flsxsriders.forumotion.com/[/url]