tie rods/steering question??

[bigwake]

its a 2000 banshee..i turn the wheel all the way left and the inside of the left rim can touch the a arm..when i turn all the way right..there is no contact..it stops before it touches anything..i can see where paint is scrapped off of the a arm where the left riim rubs..how do i fix this? and is it major? i jump but not huuge air..like maybe 6 ft or so..and 15 ft long at most..i've ridden it maybe 6 hours and haven't had any problems with the steering..but i noticed this problem since day 1..waht do you all think?

[TRX450R_Racer]

Are both the tires straight when the bars are straight? Have you checked the toe? I would start by checking the toe. Do you know how to do that?

[bigwake]

yes both tires are straight..and i don't know about toe

[RTN]

Your stem "stops" might be bent. On some bikes the stops are rubber and one might have come out.

Or....you could have a bent frame, a-arm, tie rod

Go here---->http://www.wrcracing.com/technical-support/<----to find out how to adjust toe

[bigwake]

ok thanx i'll check it out