got a big bear with an interesting problem...

Started by outindeltona, February 21, 2007, 02:47:15 AM

Previous topic - Next topic

outindeltona

well during mudfest i somehow killled my big bear before i could even get it wet...was riding it around and it just died.wont restart and had no spark.brought it home and checked for spark-and it had it.buuuuut only when there is a plug in the engine.not with the coil wire attached,just threaded in.if i check for spark without a plug threaded in ,it only sparks when i first push the starter button and right when i release it.this is on a 98 yamaha big bear 350 4x4.....any ideas?it seems like the spark it does have is weak and not timed correctly as it is not a steady spark while it is turning over

TRX450R_Racer

Maybe a bad ground. I would get the specs on the stator and coil. Then check them to see if they are good.
Member of South East Florida Trail Riders

Life's to short, wear a helmet.
Dress for the crash, not for the ride.
Ripped off by Brandon George.

outindeltona

i checked all the grounds,tried a known good coil,stator checks out ok.....next is a cdi box.....

Mr. Fixit

I had the same problem on my warrior.It was the cdi that was bad.

outindeltona

that sux....i have a spare cdi but i cant find it....tore thru my house and garage and its still mia

Other Florida sites of interest: www.PinballShark.com