Almost done!

klutchbuster400 · January 05, 2007, 01:31:17 PM

Well goforitgraphics.com sent me the wrong graphics, they sent them for stock z400 plastics, and it didnt match up right with my lakers. SO no graphics yet

Swinger bearings are all in good now, My dad grinded down one side of the swing arm a few weeks ago trying to install a pair of all balls bearings which wouldnt fit,we then found out we had to use lonestar bearings. SO with that the lonestar bearing had alot of play. We had to really think like cubans on this one and used a cut up coke can as a spacer

Young Gun · January 05, 2007, 01:34:53 PM

That thing looks good without the graphics. Keep it clean!

Eric5555 · January 05, 2007, 01:38:32 PM

your bike is soo nice.....what kind of elka's are those?

klutchbuster400 · January 05, 2007, 01:42:15 PM

Quote from: Eric5555 on January 05, 2007, 01:38:32 PM
your bike is soo nice.....what kind of elka's are those?

Quadrate with preload and comp. adjustjent.
Thanks, It looks good without the graphics, but Man I like them graphics

When we held them up against the bike they looked really good, just need to get the right ones now! and put my rear number plates on

06 BaNsHeE · January 05, 2007, 01:54:34 PM

Badass bike right there.After I get my front end done on my shee Im going to save up for some Hypers.Sick ass bike my favorite z

Eric5555 · January 05, 2007, 02:05:14 PM

are those the sport and comp series??

Toomey · January 05, 2007, 02:05:16 PM

Make sure the coke can thing holds up to real riding, just incase it takes any other parts down with it when it fails. What part would you have to but to replace what you grinded?

klutchbuster400 · January 05, 2007, 02:18:26 PM

Quote from: Toomey on January 05, 2007, 02:05:16 PM
Make sure the coke can thing holds up to real riding, just incase it takes any other parts down with it when it fails. What part would you have to but to replace what you grinded?

a WHOLE new swing arm

So im prayin the coke can works.

Thanks for the compliments guys, Just got off the phonr with goforitgraphics, now they tell us they dont make graphics for laker plastics, even after my dad specified we wanted them for lakers, So were gonna have them send us yfz laker graphics and just modify them.

snowmanzz13 · January 05, 2007, 02:58:06 PM

if anything, you saved weight by grinding done your sturdy metal and putting in light weight tin material, lol sick bike

53yfz450 · January 05, 2007, 03:06:27 PM

Sweet looks good with the hipers

LTR450 994 · January 05, 2007, 04:06:17 PM

nice looking ride Jesse. i might see you out there tomorrow.

jmiller450 · January 05, 2007, 04:47:19 PM

Looks good! You said santa got them hipers for 650. shipped? where or how?

jeremy retzsch · January 05, 2007, 05:37:10 PM

NICE BIKE!!!!!!!

Eric5555 · January 05, 2007, 05:40:52 PM

ya where did you buy your hipers?

Young Gun · January 05, 2007, 06:03:26 PM

Quote from: Eric5555 on January 05, 2007, 05:40:52 PM
ya where did you buy your hipers?

Santa brought them silly

The Quad FaJa · January 05, 2007, 07:01:37 PM

I love the black on black hipers...

klutchbuster400 · January 05, 2007, 07:18:59 PM

Quote from: jmiller450 on January 05, 2007, 04:47:19 PM
Looks good! You said santa got them hipers for 650. shipped? where or how?

640 shipped

My dad found a shop on ebay, he called them up to verify that they were actual dual bead lock carbon fiber hiper rims, and sure enough they were. The guy we called said he is a huge dealer of those rims, and he can cut good deals. Ill look in my warranty paper in a sec to tell you the site.

jeremy retzsch · January 06, 2007, 04:13:28 PM

It looks sick with the Beedlocks.

Alba450 · January 06, 2007, 05:12:17 PM

Looks Good!

Tires & Wheels makes it look alot better~

WOODY_450r · January 06, 2007, 05:20:16 PM

looks awsome!!! :Clap.gif

strtrcr06 · January 07, 2007, 10:23:10 PM

Where did you get those tires?

klutchbuster400 · January 07, 2007, 10:39:28 PM

Quote from: strtrcr06 on January 07, 2007, 10:23:10 PM
Where did you get those tires?

Quote from: klutchbuster400 on January 05, 2007, 07:18:59 PM
Quote from: jmiller450 on January 05, 2007, 04:47:19 PM
Looks good! You said santa got them hipers for 650. shipped? where or how?
640 shipped
My dad found a shop on ebay, he called them up to verify that they were actual dual bead lock carbon fiber hiper rims, and sure enough they were. The guy we called said he is a huge dealer of those rims, and he can cut good deals. Ill look in my warranty paper in a sec to tell you the site.

Eric5555 · January 07, 2007, 10:43:49 PM

what is the website that you got your beadlocks from?

strtrcr06 · January 07, 2007, 10:45:16 PM

Quote from: klutchbuster400 on January 07, 2007, 10:39:28 PM
Quote from: strtrcr06 on January 07, 2007, 10:23:10 PM
Where did you get those tires?

Quote from: klutchbuster400 on January 05, 2007, 07:18:59 PM
Quote from: jmiller450 on January 05, 2007, 04:47:19 PM
Looks good! You said santa got them hipers for 650. shipped? where or how?
640 shipped
My dad found a shop on ebay, he called them up to verify that they were actual dual bead lock carbon fiber hiper rims, and sure enough they were. The guy we called said he is a huge dealer of those rims, and he can cut good deals. Ill look in my warranty paper in a sec to tell you the site.

It hepls to read. $:-\$

klutchbuster400 · January 07, 2007, 10:51:55 PM

For the third time, and second time you asking me eric lol,
THEY CAME FROM EBAY, I DONT KNOW WHAT EXACT COMPANY!!!!!
It doesnt say it on the warranty paper, and Im pretty sure the box they came in is sitting under about 3 bags of cut grass, a barbeque grill, and a christmas tree at the local dump.
Just look on ebay and who ever sells them cheapest brand new is the guy my dad bought them from.