my $550 1990 ford bronco !!!!!

[rubicon500kid]

well at 1st i thought it was going to be $700 but my dad got him  to go down and we only paid $550

it runs and every thing just needs so lil things done to it

after xmas it will have (6inch lift,36s,and a bunch of other stuff) ill get better pics of it in the morning













I LOVE IT   i like it more then my tacoma  right now i think it has a lift cuz it has 33s on it 

[jeremy retzsch]

thats a killer deal.. nice truck

[MadMudder]

Sweet Nice ride. It looks pre-96 so if you need any stock parts and I mean ANY stock parts then go to this site: www.lmctruck.com They will have anything you need that is stock.

[rubicon500kid]

thanks its a 1990 it has some body rust and a few other things

dose any one have a head unit that would like to sell ?(i perfer kenwood or sony )or an indash tv would work

[rubicon500kid]

yea its not only just a mud truck my moms givng the tacoma i use befor i got this to my lil sis

[Quadracer]

hey you got a great deal on that Bronco have fun with it!!!!!!!!!!!!!!! :drive.gif

[rubicon500kid]

thanks i love it ill post pics in a few of it during the day and of my redneck speakersthey are from my house and imhooked them up (they are better then nothing)

[Quadracer]

lol!!!!! that is funny about your speakers but it is the truth it is better than nothin!!!!!!!!!!

[Yamaha72]

Nice deal, looks like it already has a 6" suspension, skyjacker I am guessing...

[rubicon500kid]

naw i think if any thing its a 4inch lift cuz it only has 33's  im up loading the pics now and will post them in a min

im eather going to put 33s back on it or just drive it with the tires now till i can get the $ for the lift

[rubicon500kid]

now here is the inside (im buying a head unit and kenwood door speakers but for now i have this lol)







and the best part my floor mats

[450rcrazy]

congratulations !  nothing like having a good piece of American made Iron to roll over the ricers with. :ThumbsUp.gif

[rubicon500kid]

yes i cant wait to go to school and pull up to a ricer and watch him rev up his car and then ill rev up mine but my exhaust will be leavel with his driver windo lol

[Miami450R]

I photoshopped your truck to have a bigger lift , bigger tires , and also , a nice black painjob over ur dark blue , and white over the light blue parts

ill post it in a bit

[Miami450R]

here it is , i finished ahead of time. took me a while though lol.


Im no Pro:

[Fox17]

nice. looks pretty cool. of course it aint a toyota but..... nice speakers too.



i like the p/s pic too. nicce job miamiz400

[KB]

i got a 90 bronco too. theres a few cool forums like this one but for broncos. www.clubfte.com,
www.bronco.com i hope you gotta standard shift and not an automatic E40D. i'm on my 3rd e4od now. i think they corrected the problems after 94. the e4od requires frequent flushing. i wish mine was a standard shift.

[LakeMaryKid]

check out www.broncograveyard.com barely looks like a 4inch lift

[rubicon500kid]

thanks LMK my friend said it was on when he bought it so ill just take w/e lift it has right now off ad sell it when i get my RC 6inch lift


KB its a auto it was just rebilt too
thanks for the web sites im going to go check them out


im geting it painted once i get done with the body (rust and the small dents and few other stuff)
it will be black or flat black

[KB]

since it's an automatic i would put a tranny cooler on it ASAP, they may have put one already on it. since it's just been re-built they probably up-dated it to the after 93/94 tranny's which last longer. THE RE-BUILT TRANNY ALONE IS WORTH $550.00. my E4OD tranny cost more than $1500.00 to re-build. the paint problem is a defect / re-call. somethin about the primer that was used in 90. my friend got his f-150 painted by ford. i missed the recall,mine looks worse than yours. i've never drove a truck that had such a tight turning radius. it'll turn on a dime. if you got any questions ask me cause i've been thru mine allready. do all 3 power window's work ?

[rubicon500kid]

thanks ill check into the paint thing

also no none of the power windows work they are all stuck down wich sucks (the back one was up but my sis pulled it down now it wont go back up )   

thanks for the help

[KB]

i sent you a p.m. w/ my #. i'll tell you how to fix the window/motor. on the windows that are down ,can you hear the window motor turning when you hit the button ? if so the window motor needs re-built. you can rebuild them for about 15 cents each if you want to.
if you can't hear the motor and window is all the way down then the motor is binded up. (from being all the way down) to un bind the motor un bolt 3 bolts that hold motor on door, you don't have to take 3  bolts all the way out but loosen them almost all the way. then w/ your hand you can grab motor and just tweak/twist it a little. the motor wiil pop off (un-bind) hold motor tight against door (as if you tightened 3 bolts back up) and hit the button. sometimes when window is all the way down it just gets stuck there(binded up) to prevent from happening again cut a piece of styrofoam (square piece) and just put inside door under window track. the foam block will prevent motor going all the way down.keep trimming foam block till when you roll down window it stops just before hitting bottom (binded up) or just remember to not put window all the way down. which is easy for you to remember but not anyone else. on my passenger door it will get stuck down maybe 1 out of 10 times.

[wilburz]

Looks like a sweet deal boy! Nice ride!

[rubicon500kid]

thanks im working on geting a lift asap and tires im also doing all the body work so by xmas ill have it painted i hope

[DZ 350]

my buddy has that same year bronco and he chopped the exhaust right from out of the cats and it sounds sick, but now he has flowmasters  that come out right near the doors and it is sooooo loud i can hear him from 2-3 blooks away!!!

[backwoods boy]

ive got a $50 cd player plugged into my cig. lighter till Christmas 

[rubicon500kid]

i just got a kenwood cd player for it but im waiting on my kenwood door speakers and sum kenwood 6x9s for the back (going with kenwood all around )

[KB]

you fix them window motor's yet ? It's real easy.