Cracked my frame :(

[SPLDan]

Hit a table top a little wrong and came down hard on the 450R today , split the bottom of the frame somethign nasty ...

Rest of the bike looks to be alright minus I broke the rear subframe  ..

What do you guys suggest and how much do a new frame and and rear sub usually run ..

Any chance of me getting this dealer warrantied lol

[klutchbuster400]

The dealer should fix it if its under warranty, Just dont tell them you were racing or anything.

[Mrs.Nightbreed]

You can replace the subframe and if the frame isn't too bad you can weld it. Was it gussetted? Post a pic of the damage so we can better assess your options 

[TRX450R_Racer]

It probably looks like this

[Fox17]

LSR makes a sweet chromoly frame for it. so does Roll Design. probably not cheap but i is a lot stronger. they come in colors too.

[Mrs.Nightbreed]

Now that is just plain UGLY 

[4fittyr]

thats  the first honda frame i've seen like that  but it looks like u hit something with ur footpeg or nerfs because of the way its bent if you jumped it it would be up and down bend

[UncleRico]

Give Uncle Rico some duct tape and a hammer...and about 2 hours.


I can fix anything with duct tape and a hammer.

[TRX450R_Racer]

thats  the first honda frame i've seen like that  but it looks like u hit something with ur footpeg or nerfs because of the way its bent if you jumped it it would be up and down bend

Didn't hit anything. Was cracked and it wasn't noticed. Somehow it peeled back, weird

[Exmx54]

If the frame broke all the way through then you're going to have to replace it, once they break sh!t gets out of line. New OEM frames are like $500 or so, but this time gusset it before you put the bike back together and it should last long. I'd recomend either a Walsh or LSR gusset kit.

[Fox17]

how do you gusset a bike? is there any welding?

[Chevy1500z71]

how do you gusset a bike? is there any welding?

yes.

[backinsaddle]

how do you gusset a bike? is there any welding?

"gussets," or little pieces of steel are welded in as braces in critical areas, often where there are joints or other potential/known weak areas.  Usually requires stripping to the frame, removing all the paint

[Fox17]

who does it? i cant weld. i dont want my frame to crack though. i bought the bike to race. do i really need them? if a frame only costs 500 bucks then it woud be cheaper and easier to get a new one since i would have to have someone gusset it for me anyway.

[backinsaddle]

Unless you have $ to burn, I wouldn't worry about it.  Stock frame is plenty strong for most of us.  If you have $'s or a championship on the line...that might be different.  The weaker spot on the '04's is the stock swingarm.