300EX EXHAUST ?

Started by 300EXRACER, May 14, 2006, 06:12:34 PM

Previous topic - Next topic

300EXRACER

i have a stock muffler on my 300ex but sadly it has a large whole from rust on the end and back fires pretty bad so all im looking to do is buy another stock exhaust

so i went on ebay motors and found a 250EX muffler practically new for cheap but will this fit and correspond with my 300ex head pipe and engine?

let me know if you know anything about the subject

thanks a bunch
[url="http://i12.tinypic.com/2eqcqqd.jpg"]http://i12.tinypic.com/2eqcqqd.jpg[/url]

Yamaha72

Honestly its not worth the money for a new one, just buy a cheap slip-on...

As for your question I do not know if it will fit...
2003 Yamaha Raptor 660

2005 Ford F-150

klutchbuster400

get a dg slip on, cheap, and sounds nice if attached correctly, dont bother buying stock. If moneys not an issues get a curtis sparks ;)

300EXRACER

well moneys a huge issue.
i dont have the money for an aftermarket and this pipe is super cheap i just need to know if it will fit.
trust me i would go drop the money on a curtis sparks pipe if i had it.
[url="http://i12.tinypic.com/2eqcqqd.jpg"]http://i12.tinypic.com/2eqcqqd.jpg[/url]

klutchbuster400

Quote from: NEED A QUAD BAD on May 14, 2006, 11:46:43 PM
well moneys a huge issue.
i dont have the money for an aftermarket and this pipe is super cheap i just need to know if it will fit.
trust me i would go drop the money on a curtis sparks pipe if i had it.
well since a 300 ex is basically a 250 ex with a different cam, and bore kit, i guess it will fit, but i dont want to give you fasle info and break your new quad so dont go by what i say, find the facts!

kfx400rob

i wouldnt think that a 250ex pipe would fit on a 300ex the header is very tiny on the 250, the diameter of the pipe is probly too small
06 kfx400
00 ez-go with rotax 503.
01 gmc 2500 d-max.

ebtrx450r

Call a dealer and have them check part numbers for both quads. Then there will be no question.

kfx400rob

Quote from: klutchbuster400 on May 14, 2006, 11:50:33 PM
Quote from: NEED A QUAD BAD on May 14, 2006, 11:46:43 PM
well moneys a huge issue.
i dont have the money for an aftermarket and this pipe is super cheap i just need to know if it will fit.
trust me i would go drop the money on a curtis sparks pipe if i had it.
well since a 300 ex is basically a 250 ex with a different cam, and bore kit, i guess it will fit, but i dont want to give you fasle info and break your new quad so dont go by what i say, find the facts!

no i belive that the 300ex engine is actualy a 250X engine with a longer stroke
06 kfx400
00 ez-go with rotax 503.
01 gmc 2500 d-max.

Yamaha72

Quote from: kfx400rob on May 14, 2006, 11:57:01 PM
Quote from: klutchbuster400 on May 14, 2006, 11:50:33 PM
Quote from: NEED A QUAD BAD on May 14, 2006, 11:46:43 PM
well moneys a huge issue.
i dont have the money for an aftermarket and this pipe is super cheap i just need to know if it will fit.
trust me i would go drop the money on a curtis sparks pipe if i had it.
well since a 300 ex is basically a 250 ex with a different cam, and bore kit, i guess it will fit, but i dont want to give you fasle info and break your new quad so dont go by what i say, find the facts!

no i belive that the 300ex engine is actualy a 250X engine with a longer stroke

Correct... :Clap.gif
2003 Yamaha Raptor 660

2005 Ford F-150

DZ 350

if u went on ebay for a stock muffler, find a used aftermarket pipe for cheap on ebay, it will sound good, look and perform better than the stock pipe ;)
-05 raptor Alot of Stuff done to it ( FOR SALE !!!!! )

-98' CHEVY 4X4 SILVERADO W/ TO MUCH TO LIST !

-2007 RINCON 680 4X4 W/ WARN BUMPER, HMF PIPE, AND 26" OUTLAWS

-1987 Jeep Wrangler On 44" tractor Tires ( For Sale )

-2001 F-150 on 9" lift 36" TSL's (For Sale)

svtbolt04

The 250ex is a recon motor. The 300ex is not.
823 for life!



Black wheels, plastics, some shiny chrome pieces. Left over dirt from last year, handle bars.

svtbolt04

18310-HM3-000 (300ex muffler)
18300-HN6-000 (250ex muffler)

They are both different. The 300ex has one mounting bracket. The 250ex has two.

250ex wont work.
823 for life!



Black wheels, plastics, some shiny chrome pieces. Left over dirt from last year, handle bars.

300EXRACER

aright thanks svtbolt..
that helped a whole bunch.
[url="http://i12.tinypic.com/2eqcqqd.jpg"]http://i12.tinypic.com/2eqcqqd.jpg[/url]

svtbolt04

It actually depends on the year of your bike. The ones I had posted were for a 2005.

I think the previous years were one mount, but they arent bent right for a 250ex.
823 for life!



Black wheels, plastics, some shiny chrome pieces. Left over dirt from last year, handle bars.

300EXRACER

thats exactly right..the guy at honda said the same thing
[url="http://i12.tinypic.com/2eqcqqd.jpg"]http://i12.tinypic.com/2eqcqqd.jpg[/url]

300EXRACER

anyone know anyone thats selling a pipe for a 300ex cheap?
[url="http://i12.tinypic.com/2eqcqqd.jpg"]http://i12.tinypic.com/2eqcqqd.jpg[/url]

svtbolt04

What do you consider cheap? You can find pipes that people have taken off of their bikes to put on full exhausts.

I would keep checking ebay because I dont think many people here have 300ex's
823 for life!



Black wheels, plastics, some shiny chrome pieces. Left over dirt from last year, handle bars.

300EXRACER

yeaa i know.
thats what ive been doing.
i have close to no money.
im looking to spend like 50 bucks on a stock pipe so atleast i can go riding this weekend.
[url="http://i12.tinypic.com/2eqcqqd.jpg"]http://i12.tinypic.com/2eqcqqd.jpg[/url]

atvtrailer

Quote from: 300EXRACER on May 17, 2006, 01:28:39 AM
yeaa i know.
thats what ive been doing.
i have close to no money.
im looking to spend like 50 bucks on a stock pipe so atleast i can go riding this weekend.

alot of stock pipes on ebay sell for like 20-30$, just keep lookin and u will probly find one, stock pipes sell for cheap, unless u go to the dealer and then they want more than a new aftermarket lol
05 450r #13B